2.3.1  
Read/write database 
 

General Procedure  
 1.   The configuration of the communication system is read via the menu item File/Transfer/Communication/Read/write database/System -> PC and is then stored as the customer database in your PC's main memory.
 2.   This customer database can now be administered using the Settings menu and can also be stored on the hard disk for later use.
 3.   In order to enable the implemented settings, the database is transferred back to the communication system via the menu item
PC -> System.
The transfer from the PC -> System overwrites all previous communication system settings.  

Delta mode  
When Delta mode is activated, only changes made since the customer database was last downloaded are written to the communication system. If, for example, only a station name is changed, then the transmission time is drastically reduced.
To determine the delta data, the program compares the loaded customer database with the file lastload.kds, which is automatically created after every transfer from the System -> PC and is stored on the hard disk.

See also:  
   -   Section 9.19 "Transfer"
   -   Section 9.19.1 "Transfer | Communication"

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590M1000176A9   2014-03-03