2.11  
Releasing the USB Interface On HiPath 2000 / HiPath OpenOffice EE for Administration 
 
On system start-up the USB interface on HiPath 2000/HiPath OpenOffice EE is in CLI mode (CLI: Command Line Interface). In order to perform HiPath 2000/HiPath OpenOffice EE administration with HiPath 3000 Manager via USB, the system interface must be enabled via CLI.
This requires the following steps:
 1.   Connect the PC and HiPath 2000/HiPath OpenOffice EE via a USB cable
 2.   If the USB driver HiPath 2000/HiPath OpenOffice EE Gateway is not yet installed on the PC, you must first set up the driver. Once you have plugged in the USB cable, Windows finds the new hardware, and the new interface must be installed with the USB driver. The USB driver is provided on the HiPath 2000/HiPath OpenOffice EE system CD (usb.inf/usb.sys)
 3.   Determine the COM interface (e.g. COM 3) for the USB port. To do so, start the Device Manager under My Computer | Properties | Hardware . Under Ports (COM and LPT), you can view the number of the COM interface of the HiPath 2000/ HiPath OpenOffice EE Gateway
 4.   Use the "Hyperterminal" program to set up a connection to HiPath 2000/ HiPathOpenOffice EE and enable the USB interface of HiPath 2000/HiPath OpenOffice EE. Once the USB interface is enabled via CLI, HiPath 2000/ HiPath OpenOffice EE enables this interface for V.24 operation. To do this:
   -   Enter any character
   -   Log on using your user name and password (31994/...)
   -   Obtain write access using the command "get write access"
   -   Enable the USB interface using the command "release usb", and confirm with "y" (yes)
To revert to CLI functionality on HiPath 2000/HiPath OpenOffice EE, a reset must be carried out on HiPath 2000/HiPath OpenOffice EE.
In order to use HiPath 3000 Manager to connect via USB with HiPath 2000/HiPath OpenOffice EE, select USB as the interface under Options | Program options | Communication, and select the COM port of the USB driver (the baud rate settings are not relevant for USB). In the Transfer dialog, select Direct access.

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590M1000176A9   2014-03-03