2  
Introduction 
 
HiPath 3000/5000 V9, Manager E, Administrator Documentation:
A31003-H3590-M100-10-76A9, HZ700D.50.100, 02/2014
HiPath 3000 Manager is the administration program for the following communication systems:
 •   Hicom 150 E Office
 •   Hicom 150 H
 •   HiPath 3000
 •   HiPath AllServe
 •   HiPath 5000
 •   HiPath 500
 •   HiPath 2000
 •   HiPath OpenOffice EE
This administration manual is intended for anyone who is responsible for the administration and management of one of the above communication systems. All the important information needed to operate the HiPath 3000 Manager administration program can be found here.
 •   If you already have HiPath 3000 Manager installed and want to start working with it immediately, go to Chapter 4 " Start and Log-on".
 •   Chapter 3 "Operation" describes the user interface of HiPath 3000 Manager.
 •   This chapter describes the basic functions of HiPath 3000 Manager.
The help for HiPath 3000 Manager describes all available functions for all supported communication systems. If you cannot access certain functions, this is most likely due to the fact that these functions are not supported by the selected communication system. HiPath 3000 Manager automatically shows you only those functions which are supported by the selected communication system.

Requirements  
All hardware components of the communication system have been installed and connected.
HiPath 3000 Manager must have been installed on your PC by you or by authorized service personnel. Your PC must have a CD-ROM or DVD drive for this.
If you are using Windows NT/2000/XP/2003, note that the access rights of the current account may not be sufficient for the installation and operation of HiPath 3000 Manager.
If this is the case, HiPath 3000 Manager must be installed and operated under an account that has the appropriate system access rights.
If you are not sure about your access rights, contact your system administrator.  
Note that the power management feature on your PC should not be active when transferring customer databases to and from the communication system.

Chapter Contents  
This chapter contains the following topics:

 Topic  
Section 2.1 "About this Documentation"  
Section 2.2 "Further information"  
Section 2.3 "Basic Functions"  
Section 2.4 "Wizard"  
Section 2.5 "File Types"  
Section 2.6 "File ass_150e.ini"  
Section 2.7 "System Requirements"  
Section 2.8 "Communication/access types"  
Section 2.9 "Installing and Uninstalling the Software"  
Section 2.10 "Brief guidelines for starting up"  
Section 2.11 "Releasing the USB Interface On HiPath 2000 / HiPath OpenOffice EE for Administration"  

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590M1000176A9   2014-03-03