5.1.5  
Assigning HG 1500 channels to the last route and assigning the protocol 
 
Assigning HG 1500 channels to the last route
All HiPath HG 1500 channels must be placed in the last route as only the PABX number of the last route is entered in the CAR table. This procedure applies to networks with different local network accesses for each node.
HG 1500 channels must be assigned to the last route (route 8 for HiPath 2000/HiPath OpenOffice EE, route 16 for HiPath 3000, route 64 for HiPath 5000). A name can be assigned for the last route (e.g. "LAN").  
 1.   To assign an HG 1500 channel to the last route, click on
Settings| Lines/networking
 2.   Click Route column in the row containing the desired trunk and select the last route.
Assigning a protocol to HG 1500 channels
 1.   In the Param column, double-click the row containing the required trunk.
The Parameter dialog box appears.
 2.   Select the entry HXGM/HXGS: CorNet IP- Trunking from the Protocol: Description drop-down list.

Assigning routes to HG 1500 channels  
 1.   Click the Routes tab.
 2.   Select the last route from the Routes list.
 3.   Enter the call number of the PABX in the PABX number field.
The node is identified in the networked system on the basis of the PABX number. The PABX number must not be listed in the numbering plan and must be unique in the networked system.

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590M1000176A9   2014-03-03