5.1.3 Setting up the HiPath IP address (HIP)

5.1.3	Setting up the HiPath IP address (HIP)

1.	Load the node CDB.

2.	Select Settings \| Network.

3.	Select the HIP protocol from the IP-Access drop-down list in the Basic settings tab.

4.	Enter the IP address and the Subnet mask in the areas LAN interface and PSTN interface.

The HG 1500 card is integrated in the LAN. The system administrator of the relevant LAN provides the necessary information.

For Routing, the IP address of the HG 1500 card should be entered as the gateway.

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10		up

Disclaimer & Copyright	ID: P31003H3590M1000176A9	2014-03-03