5.6.4 |
Configuring an HG 1500 card for Media Streaming |
| The configuration steps described below are performed via WBM and only apply to the Media HXG card in node 1. All other HXG cards automatically receive their setting for PABX routing from the server through the settings under Media Attachment Devices (Car tables). The access codes for the individual services and the IP address for the application server are also configured here. |
| The HG 1500 card must be basically configured in accordance with the HG 1500 Service Manual as a prerequisite for the HG 1500 connection to the server. The card thus has a permanent IP address and is available in the LAN. |
Configuring cards |
| 1. | Read the card's current CDB. |
| 2. | From the Voice Gateway level, select the menu PBX Node. |
| 3. | Click the Pencil icon to add a new node. |
| 4. | Enter an appropriate node ID followed by the IP address of the Application Server. |
| 5. | Enter the values described in the table below for each parameter. |
Entering call number ranges |
| The relevant access codes are to be entered here for the voice, fax and announcements services (as for the configuration in HiPath 3000 Manager). The communication system's announcement service must provide a voice band on the HG 1500. |
| 1. | Click the PBX routing level in the menu tree. |
| 2. | Click the Pencil icon |
| 3. | Enter the access code for the relevant service and bind it to the previously configured node (communication system, Media PC). |
| 4. | Click the new access code in the menu tree and select the previously configured access code for the relevant service. |
| 5. | Proceed as described in steps 1 through 3 for the other services. |
| The access codes configured in the communication system are now sent by the HG 1500 card to the server on which Media Streaming is running. |
| HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10 | up |
|
|
||
| Disclaimer & Copyright | ID: P31003H3590M1000176A9 | 2014-03-03 |