5.6.2  
Configuring LCR 
 
Please note the different configuration of the LCR in node 1 (with Media PC card) and the following nodes with only one trunk card.  
The configuration steps described here apply both for node 1 with Media PC and trunk card and for every other node with a trunk card.
 1.   Select the menu item Settings | Least cost routing and then click the Codes and Flags tab.
 2.   Activate the options Activate LCR and Digit-by-digit.

Configuring the dialing rules table for LAN  
The configuration steps described here apply both for node 1 with Media PC and trunk card and for every other node with a trunk card.
 1.   Click the Dialing rules table tab.
 2.   Create a dial rule that provides the rule format E1A with the procedure Corporate network.
 3.   Then click Apply.

Configuring route tables for node 1  
The configuration steps described here only apply for node 1 with a Media card.
 1.   Click the Route table tab.
 2.   Link the previously configured dial rule to route 15 (Media-HXG).
 3.   Then click Apply.

Configuring route tables for all other nodes  
The configuration steps described here only apply for all other nodes in the networked system with trunk card.
 1.   Click the Route table tab.
 2.   Link the previously configured dial rule to route 16 (IP Trunk).
 3.   Then click Apply.

Configuring dial plans  
This tab is used to configure the respective access codes for the announcements, fax and voice mail services which are later bound in the PCO to the corresponding protocol.
The configuration steps described here apply both for node 1 with Media PC and trunk card and for every other node with a trunk card.
 1.   Select the Dial plan tab.
 2.   Assign a dialed digit string to the above-mentioned route table.
 3.   Transfer the CDB to the communication system.

Transferring the CDB to a networked system  
 1.   Select the menu item File | HiPath 5000 RSM/AllServe | Transfer | HiPath 5000 RSM/AllServe Server.
 2.   Then click the Manager -> Server button.
The CDB is transferred. Communication system access to the Media PC is now created.

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590M1000176A9   2014-03-03