5.5.2 IP network

5.5.2	IP network

Configuration is performed via WBM in an IP network environment. The Routing item is used for two settings in the program.

1.	All nodes in the IP network must be entered with a unique node number and the associated IP address under the entry Voice Gateway \| PBX node.

2.	The station call numbers and their node number which should be reached by the HiPath HG 1500 card to be configured are entered under Voice Gateway \| PBX routing. It may also be necessary to adapt the assigned service (voice, fax, modem).

The default setting "Voice" must be used for digital data transfer via X75.

The access authorization flag must be set via HiPath 3000 Manager under Settings | Network | HiPath 5000 RSM/AllServe Parameter in the field HiPath 5000 RSM/AllServe access authorization for the corresponding HXGM/HXGS card.

CO-CO transit cannot be supported in a call-number-protected service evaluation.

Similarly, it is not possible to reach multiple services via a single call number (e.g. fax or S0 card with miscellaneous services under an MSN).

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10		up

Disclaimer & Copyright	ID: P31003H3590M1000176A9	2014-03-03