5.2.9	APS transfer

A new system APS can be added to individual nodes via the TFTP protocol. Using SNMP or HiPath 3000 Manager, a TFTP server address and a path name are then configured via Settings | Network | Basic settings in the area TFTP Server on which APS is saved. The server can also be located on a TFTP server of this kind. The APS transfer is the performed following an SNMP command or after a timeout.

APS transfer is also possible via HiPath 3000 Manager. In this case, APS transfer is started via HiPath 3000 Manager, and the FST files must be saved in the server's directory.

APS transfer can be executed from a remote center.

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10		up
Disclaimer & Copyright	ID: P31003H3590M1000176A9	2014-03-03