Ascend Configurator 1.0.0
Release Notes
November 13, 1997


==============================================================================
Contents:

1. Introduction
2. Reporting Bugs
3. Known Problems and Incompatibilities


==============================================================================
1. INTRODUCTION

This release note accompanies version 1.0.0 of the Java-Based Ascend
Configurator. This version of the Configurator is designed to work with the following Ascend products and 
software loads:

* Ascend Pipeline 220
    Requires software version 5.1Ap5 or later.


==============================================================================
2. REPORTING BUGS

You are encouraged to report bugs and make suggestions for future 
enhancements to the software. Please send your comments via e-mail 
to "support@ascend.com".  Include the following information as part of 
your message:

* The Ascend Configurator version number you are running (e.g. 1.0.0)
* Machine make, model, and installed memory
* Operating system and version number (e.g. Windows NT 4.0)
* The Ascend product you are configuring and the version of software
  running on that product (e.g. Pipeline 220 version 5.1Ap5)


==============================================================================
3. KNOWN PROBLEMS AND INCOMPATIBILITIES

- The second ethernet port of a Pipeline 220 is not yet functional with
  AppleTalk.
- Version 1.0.0 of JBAC will only work with Java 1.0.2, the version of Java
  is installed with Internet Explorer 3.0.2.  JBAC will not run under Java
  versions greater than 1.0.2 (e.g. Java 1.1.4 which is installed with IE 4).


Ascend Communications, Inc.
1275 Harbor Bay Parkway
Alameda, CA  94502