10.13.4  
Logging Mobile Telephones on to the System 
 

Introduction  
Sixteen mobile telephones are released for use by entering the HiPath cordless system number (DECT identification, eight hexadecimal places) and inserting the SLC16N in HiPath 3550, after which they can be logged on (mobile telephone codes, or PINs, are assigned. Other mobile telephones must be released before they can be used.
For initial installation of the HiPath Cordless Office, the HiPath cordless system number must be ordered together with the SLC16N board. Replacement boards are always delivered without a HiPath cordless system number.  
Before logging on a mobile phone, you must open the login window from a system telephone (Assistant T) by entering the code and password. A maximum of 10 login windows can be open at a time.
Then type the station numbers of the mobile telephones you want to log on.

10.13.4.1  
Opening the HiPath 3000 Login Window 

 Input  
 Activity  
 Display  
 *94 2 19970707  
Open the login window  
Number:  
 124  
Type the station number of the handset you want to log on (such as, 124)  
Number:  
 125  
Type the station number of the second handset you want to log on (such as, 125)  
Number:  
 :  
 :  
 :  
 :  
 :  
 :  
The login window remains open for ten minutes per station. The handset must log on during this period (refer to Page 10-135).

10.13.4.2  
Logging On the Mobile Telephone 
Example: log the mobile telephone (station number "125") on to the DECT telephone system 2 using mobile telephone PIN "11112345".

 Step  
 Entry or Key  
 Handset Display  
 1.  
Switch on the mobile telephone by holding down the hook key for at least 1 second.  
You hear a confirmation tone.  
The first time you log on, the message "Register?" appears on the handset display. The second time you log on, "Base 1" or a similar message flashes.  
 2.  
Make the following entries within one minute.  
Press the menu key.  
   
 3.  
Select a station1 (for example: Base 2) and confirm.  
 
 4.  
Open the add-on menu.  
   
 5.  
Select "Register" and confirm your choice.  
The following prompt appears:  
"Please enter PIN:"  
 6.  
Enter the eight-digit PIN (mobile telephone code) "11112345" and confirm.  
"11112345"  
 7.  
Once you have logged on properly, "Base 2" or a similar message appears and the bell symbol " " flashes.  
 
1Base = DECT telephone system
After logging on and releasing a handset, always turn on the out-of-range warning signal. For more information, please refer to the operating instructions.

10.13.4.3  
Checking the Login Status of the Mobile Telephones 
The current login status of mobile telephones can be checked using HiPath 3000/5000 Manager E in the system view ("Cordless ..." dialog in the "Settings" menu) and the station view.

10.13.4.4  
Replacing, Locking, and Logging Off a Mobile Telephone 
If you need to replace a handset for servicing, you must change the mobile telephone code (PIN) of the old handset before logging on the replacement telephone.
When you replace a mobile telephone, the station must be assigned a new mobile telephone code (PIN) in the HiPath 3000 system. This automatically logs off the mobile telephone.
This also prevents a person who knows the old PIN to log on an invalid mobile telephone.  

HiPath 3000/5000 V9, Service Documentation, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2012-06-25