Figure 10-1

OpenStage 10

Feature	Description
Pre-programmed function keys	Three audio keys for:    •   increasing the volume  •   Activating/deactivating the loudspeaker  •   decreasing the volume
Dialing keypad	For entering digits 0 to 9, pound and asterisk symbols, letters, punctuation marks and special characters.
Programmable keys	3 keys:    •   Can be programmed as function, DSS or trunk keys by service personnel  •   Labeled with paper label
Additional features	•   Open listening  •   Wall mounting

Feature	Description
Display	LCD, immobile, two lines, monochrome, 24 x 2 characters
Pre-programmed function keys	•   Three audio keys for:    -   decreasing the volume and brightening the display contrast    -   activating/deactivating the loudspeaker    -   increasing the volume and darkening the display contrast  •   Mailbox key for checking voicemail  •   Menu key for the communication system's Service menu
Dialing keypad	For entering digits 0 to 9, pound and asterisk symbols, letters, punctuation marks and special characters
Navigation keys	Three keys for:    •   scrolling forward through the menu or opening the idle menu  •   executing actions  •   scrolling back through the menu or opening the idle menu
Programmable keys	•   Eight keys  •   Each key can be programmed either as a function key or as a DSS key
Add-on device	"OpenStage Key Module 15":    •   18 programmable keys  •   Each key can be programmed either as a function key or as a DSS key  •   A maximum of one "OpenStage Key Module 15" can be connected to the telephone
Port	UP0E
Additional features	•   Full-duplex speakerphone mode  •   Open listening  •   Suitable for wall mounting

Figure 10-3

OpenStage 20

Feature	Connection variant
	CorNet-IP (HFA)	TDM
General features	Tilt LCD graphics display, 24 x 2 character resolution, monochrome
	multi-functional 3-way navigator
General features	7 pre-programmed function keys: Disconnect, call forwarding, redial, service/application menu, voice messages, loudspeaker, mute
	Full-duplex speakerphone mode (not for 20 E)
	Open listening
	Suitable for wall mounting
Interfaces	Integrated Ethernet switch to connect a PC
	LAN port (10/100 Base-T)
IP features	CorNet-IP (HFA) based on H.323
	Security and Encryption for H-Series Multimedia Terminals H.235 Annex D
	Voice codecs G.711, G.729, G.722
	DHCP, FTP, HTTP, HTTPS, SNMP
	Port-Based Network Access Control 802.1x
	QoS based on DiffServ
	VLAN
	IEEE 802.3af Power over Ethernet (PoE)

Figure 10-4

OpenStage 30

Feature	Description
Display	LCD, immobile, two lines, monochrome, 24 x 2 characters
Pre-programmed function keys, first row	•   End call (disconnect)  •   Redial  •   Switch call forwarding on/off  •   Switch headset on/off  •   Switch microphone on/off
Pre-programmed function keys, second row	•   Three audio keys for:    -   decreasing the volume and brightening the display contrast    -   activating/deactivating the loudspeaker    -   increasing the volume and darkening the display contrast  •   Mailbox key for checking voicemail  •   Menu key for the communication system's Service menu
Dialing keypad	For entering digits 0 to 9, pound and asterisk symbols, letters, punctuation marks and special characters
Navigation keys	Three keys for:    •   scrolling forward through the menu or opening the idle menu  •   executing actions  •   scrolling back through the menu or opening the idle menu
Programmable keys	Eight keys:    •   Each key can be programmed either as a function key or as a DSS key  •   Labeled with paper label
Key modules	1 "OpenStage Key Module 15":    •   18 programmable keys  •   Each key can be programmed either as a function key or as a DSS key  •   A maximum of one "OpenStage Key Module 15" can be connected to the telephone Or: 1 "OpenStage BLF" busy lamp field
Connections	•   UP0E (Protocol: CorNet-TS)  •   USB-B (slave interface) for first-party CTI  •   121TR9-5* for headset, 8 pins
Additional features	•   Full-duplex speakerphone mode  •   Open listening  •   Wall mounting  •   Software download via SLMO  •   Downward compatibility to earlier systems

Figure 10-5

OpenStage 40

Feature	Connection variant
	CorNet-IP (HFA)	TDM
General features	Tilt LCD graphics display with background lighting, 40 x 6 character resolution, monochrome
	multi-functional 5-way navigator
General features	8 pre-programmed function keys: disconnect, call forwarding, redial, service/application menu, voicemail messages, loudspeaker, mute, headset
	6 programmable touch/sensor keys: Function, speed dial and line keys
	Full-duplex speakerphone mode
	Open listening
	Suitable for wall mounting
Interfaces	Integrated Ethernet switch to connect a PC	USB slave
	LAN port (10/100 Base-T)
	Port for headset
	Port for key module and BLF
IP features	CorNet-IP (HFA) based on H.323
	Security and Encryption for H-Series Multimedia Terminals H.235 Annex D
	Voice codecs G.711, G.729, G.722
	DHCP, FTP, HTTP, HTTPS, SNMP
	Port-Based Network Access Control 802.1x
	QoS based on DiffServ
	VLAN
	IEEE 802.3af Power over Ethernet (PoE)

Figure 10-6

OpenStage 60

Feature	Description
Display	TFT, swivel, background lighting, 320 x 240 pixels, QVGA, 16 bit color depth, suitable for graphics
Pre-programmed function keys, left	•   End call (disconnect)  •   Switch call forwarding on/off  •   Switch voice dialing on/off
Pre-programmed function keys, right	•   Activating/deactivating the loudspeaker  •   Switch headset on/off  •   Switch microphone on/off
Mode keys	•   Display telephony interface (for example, connection status, connection duration)  •   Display phonebooks:    -   Personal phonebook    -   LDAP directory    -   HiPath 3000 phonebook  •   Display call lists:    -   Dialed numbers (internal phone redial)    -   Missed calls    -   Received calls  •   Display messages:    -   Text messages    -   Voice mail  •   Menu key:    -   Service menu    -   User menu    -   Administration menu    -   Applications tab  •   Display Help function
TouchSlider	Set the current volume    •   Ringtone  •   Handset  •   Loudspeaker
TouchGuide	Navigate in lists, menus and input fields
Dialing keypad	For entering digits 0 to 9, pound and asterisk symbols, letters, punctuation marks and special characters.
Programmable sensor keys	Eight keys:    •   Each key can be programmed as a function, DSS or trunk keys. If programmed for redial, the key accesses the HiPath 3000 redial function.  •   Key labeling on the display
Key modules	2 "OpenStage Key Module 60/80" modules:    •   12 programmable keys  •   Each key can be programmed as a function, DSS or trunk key  •   Up to two "OpenStage Key Module 60/80" modules can be connected to the telephone.
Connections	•   USB-A (master interface) for first-party CTI  •   121TR9-5* for headset, 8 pins  •   Bluetooth  •   Port for key module  •   For TDM only: USB-B (slave interface) for first-party CTI  •   For CorNet-IP (HFA) only: LAN port (10/100 Base-T)  •   For CorNet-IP (HFA) only: Integrated Ethernet switch for connecting to a PC
Additional features	•   Full-duplex speakerphone mode  •   Open listening  •   Voice dialing  •   Polyphonic and mp3 ring tones supported  •   No wall mounting
IP features [for CorNet-IP (HFA) only]	•   CorNet-IP (HFA) based on H.323  •   Security and Encryption for H-Series Multimedia Terminals H.235 Annex D  •   Voice codecs G.711, G.729, G.722  •   DHCP, FTP, HTTP, HTTPS, SNMP  •   Port-Based Network Access Control 802.1x  •   QoS based on DiffServ  •   VLAN  •   IEEE 802.3af Power over Ethernet (PoE)

Figure 10-7

OpenStage 80 [CorNet-IP (HFA)]

Feature	Description
Display	TFT, swivel, background lighting    •   TDM: 320 x 240 pixels, QVGA, 16 bit color depth, suitable for graphics  •   CorNet-IP (HFA): 640 x 480 pixels, VGA, 16 bit color depth, suitable for graphics
Pre-programmed function keys, left	•   End call (disconnect)  •   Switch call forwarding on/off  •   Switch voice dialing on/off
Pre-programmed function keys, right	•   Activating/deactivating the loudspeaker  •   Switch headset on/off  •   Switch microphone on/off
Mode keys	•   Display telephony interface (for example, connection status, connection duration)  •   Display phonebooks:    -   Personal phonebook    -   LDAP directory    -   HiPath 3000 phonebook  •   Display call lists:    -   Dialed numbers (internal phone redial)    -   Missed calls    -   Received calls  •   Display messages:    -   Text messages    -   Voice mail  •   Menu key:    -   Service menu    -   User menu    -   Administration menu    -   Applications tab  •   Display Help function
TouchSlider	Set the current volume    •   Ringtone  •   Handset  •   Loudspeaker
TouchGuide	Navigate in lists, menus and input fields
Dialing keypad	For entering digits 0 to 9, pound and asterisk symbols, letters, punctuation marks and special characters.
Programmable sensor keys	TDM: Eight keys/CorNet-IP (HFA): Nine keys    •   Each key can be programmed as a function, DSS or trunk key. If programmed for redial, the key accesses the HiPath 3000 redial function.  •   Key labeling on the display
Key modules	2 "OpenStage Key Module 60/80" modules:    •   12 programmable keys  •   Each key can be programmed as a function, DSS or trunk key  •   Up to two "OpenStage Key Module 60/80" modules can be connected to the telephone.
Connections	•   USB-A (master interface) for first-party CTI  •   121TR9-5* for headset, 8 pins  •   Bluetooth  •   Port for key module  •   For TDM only: USB-B (slave interface) for first-party CTI  •   For CorNet-IP (HFA) only: LAN port (10/100 Base-T)  •   For CorNet-IP (HFA) only: Integrated Ethernet switch for connecting to a PC
Additional features	•   Full-duplex speakerphone mode  •   Open listening  •   Voice dialing  •   Polyphonic and mp3 ring tones supported  •   No wall mounting
IP features [for CorNet-IP (HFA) only]	•   CorNet-IP (HFA) based on H.323  •   Security and Encryption for H-Series Multimedia Terminals H.235 Annex D  •   Voice codecs G.711, G.729, G.722  •   DHCP, FTP, HTTP, HTTPS, SNMP  •   Port-Based Network Access Control 802.1x  •   QoS based on DiffServ  •   VLAN  •   IEEE 802.3af Power over Ethernet (PoE)

The DLI function can only be used for standalone systems.   The Deployment and Licensing service is available for networked HiPath 3000 systems with or without HiPath 5000 RSM. The Deployment and Licensing service can also be used for systems that do not satisfy the prerequisites for using the DLI function. For information on how to use this tool, see the Deployment Service Administrator Manual.

Table 10-1

OpenStage-Terminals - Description of Ports

Port	Description	Telephones
	CorNet-IP connection variants   Connection for key module	OpenStage 15   OpenStage 40   OpenStage 60   OpenStage 80
	TDM connection variants   Connection for key module	OpenStage 15 T   OpenStage 30 T   OpenStage 40 T   OpenStage 60 T   OpenStage 80 T
	CorNet-IP connection variants   Port for an external power supply unit. Section 10.1.4 "Powering the OpenStage Telephones, Add-On Devices, and Adapters" contains information about the cases in which an external power supply unit is required.	OpenStage 15   OpenStage 20   OpenStage 40   OpenStage 60   OpenStage 80
	TDM connection variants    •   Additional power supply not required: Connection to HiPath 3000  •   Additional power supply required: Connection to an external power supply unit. Section 10.1.4 "Powering the OpenStage Telephones, Add-On Devices, and Adapters" contains information about the cases in which an external power supply unit is required.  •   Port on OpenStage PhoneAdapter	OpenStage 10 T   OpenStage 15 T   OpenStage 20 T   OpenStage 30 T   OpenStage 40 T   OpenStage 60 T   OpenStage 80 T
	CorNet-IP connection variants   First USB port; not used.	OpenStage 60   OpenStage 80
	TDM connection variants   First USB port, e.g., for first-party CTI	OpenStage 30 T   OpenStage 40 T   OpenStage 60 T   OpenStage 80 T
	CorNet-IP connection variants   Second USB port, e.g., for USB memory stick	OpenStage 60   OpenStage 80
	TDM connection variants   Second USB port, e.g., for USB memory stick	OpenStage 60 T   OpenStage 80 T
	CorNet-IP connection variants   Port for PC, e.g., for OpenStage Manager	OpenStage 15   OpenStage 20   OpenStage 40   OpenStage 60   OpenStage 80
	TDM connection variants   -	-
	CorNet-IP connection variants   LAN connection	OpenStage 15   OpenStage 20   OpenStage 40   OpenStage 60   OpenStage 80
	TDM connection variants   -	-
	CorNet-IP connection variants   Port for headset	OpenStage 40   OpenStage 60   OpenStage 80
	TDM connection variants   Port for headset	OpenStage 30 T   OpenStage 40 T   OpenStage 60 T   OpenStage 80 T
	CorNet-IP connection variants   Handset port	OpenStage 15   OpenStage 20   OpenStage 40   OpenStage 60   OpenStage 80
	TDM connection variants   Handset port	OpenStage 10 T   OpenStage 15 T   OpenStage 20 T   OpenStage 30 T   OpenStage 40 T   OpenStage 60 T   OpenStage 80 T