10.3.2 |
Software Upgrade of IP Workpoints via the System |
Notes |
| Each of the IP workpoint types supported requires different software (image file). |
| The image files are usually generated with vxWorks.app. You do not have to rename the image files because the files are assigned a new name when saved on the hard disk on the HiPath Xpressions Compact board. |
| The HiPath Xpressions Compact board's hard disk has enough space for a number of black-and-white images at once. Only IVMP4 and IVMP4N boards generate an error message when there is not enough space for image files (currently around 200 MB is available). |
Procedure |
| 1. | The SW images from the new software version are available and are loaded onto the hard disk on the HiPath Xpressions Compact board. A separate DLI-WBM is available for this. The DLI WBM is accessed via https:// <IP address of the HiPath Xpressions Compact board>/dli. |
| 2. | The HiPath Xpressions Compact`s internal Deployment service checks whether the software image is available in a valid format. If this is not the case, an appropriate error message is generated for the user by the DLI-WBM. |
| Note: A software upgrade is only possible within a main version (example: update from V5.1.0 to V5.3.4). The HiPath Xpressions Compact`s internal Deployment service does not support main-version upgrades or migrations (software type changes). |
| 3. | The HiPath Xpressions Compact`s internal Deployment service prompts all registered IP workpoints that are to be equipped with the new software to start software deployment. |
| 4. | The IP workpoints in question download the software image from the HiPath Xpressions Compact`s internal FTP server and start a reboot. |
| 5. | After booting, the IP workpoints reregister with the HiPath Xpressions Compact`s internal Deployment service. Based on the registration data, the Deployment service recognizes whether the new software was successfully installed; it then outputs the appropriate message via the DLI-WBM. |
| You can use Web-based Management to display information on all registered IP workpoints and their software deployment status. |
| Software cannot be upgraded for SIP-based workpoints. |
| HiPath 3000/5000 V9, Service Documentation, Issue 7 | up |
|
|
||
| Disclaimer & Copyright | ID: P31003H3590S100017620 | 2012-06-25 |