12.2.12	Finalize product configuration

12.2.12.1

Finish SSDP configuration

Finalizing the configuration shall always be done on the enterprise server and not on device side. It is more comfortable and not so error-prone to be done this way. Therefore the action is at the regional data administrator or the responsible configuration center.

Procedure

1.	This step is triggered by the call of the service technician or an e-mail from him.

2.	Data administrator adds the customer and location data to the new device. Very important is the correct Region due to visibility issues.

12.2.12.2

Update SIRA data

For each device, a link from SIRA to SSDP has to be created which will allow to establish an SSDP session via connection popup menu from Equipment Explorer.

For that, the device in SIRA has to exist or a new entry has to be created. This step is not relevant for devices which do not have any SIRA access at all.

Procedure

1.	Create an entry in SIRA for the new device according to the SIRA documentation which can be found on the respectively homepage. Also your data administrator may assist.

2.	Create a new connection type with device ID for linking to SSDP.

HiPath 3000/5000 V9, Service Documentation, Issue 7		up
Disclaimer & Copyright	ID: P31003H3590S100017620	2012-06-25