Table A-1

Starting System Administration (Service)

Step	Input	Description
1.	*95	Start system administration
2.	XXXXX	Enter user name:    •   Fixed password concept: User name = 31994  •   Variable password concept: Individual user name
3.	XXXXX	Enter password:    •   Fixed password concept: Password = 31994  •   Variable password concept: Individual password

Table A-2

Expert Mode Code Groups

Code Group	Function
System maintenance expert mode (previously Assistant T)
11	Call detail recording
12	Speed dialing system
13	Account codes
14	Set up station
15	CO call privileges
16	Incoming calls
17	Networking
18	Traffic restriction
19	Displays
20	ISDN parameters
21	Analog CO interface
22	System settings
23	Code
24	Door relay
25	Announcement/Music
26	Relays
27	Sensors (HiPath 3550/HiPath 3350/HiPath 3500/HiPath 3300 only)
28	Edit CDB
29	System details
30	Remote service
31	Call distribution
32	Paging
33	Attendant
34	DISA
35	Least Cost Routing (LCR)
36	HiPath Cordless Office
37	Security
51 - 63	Customer administration (previously Manager TC)

Table A-3

Expert Mode Codes

Code				Function
11				Call detail recording
11	1			CDR/station (call detail recording at station)
11	1	1		View CDR/station; enter station number
11	1	2		Print CDRS
11	2			CDR per trunk (call detail recording per trunk)
11	2	1		View CDR per trunk; select slot/trunk
11	2	2		Print CDRT
11	3			CDR central (call detail recording central)
11	3	1		Output format: 0 = compressed, 1 = long
11	3	2		Station number format, suppress digits: 0 = no, 1 = yes
11	3	3		Incoming calls: 0 = no, 1 = yes
11	3	4		Call duration 0 = no, 1 = yes
11	3	5		Output MSN: 0 = no, 1 = yes
11	3	6		Call charge display: 1 = Amount, 2 = Pulses
11	3	7		Outgoing without connection: 0 = no, 1 = yes
11	4			Call charge factor   Enter 0 % to 10000 %
11	5			ISDN factor   Enter 0 % to 10000 %
11	6			Currency, alphanumeric entry of max. 3 characters (not for U.S.)
11	7			Call log: 0 = no, 1 = yes
11	8			CDRA (call detail recording, attendant), pay phone, station.
11	9			Computing accuracy, decimal digits (0 to 3)
12				Speed dialing system
12	1			Speed dial numbers, external station numbers   000 to 999 (HiPath 3550/HiPath 3500); 000 to 299 (HiPath 3350, HiPath 3300)
12	2			Speed dial names (alphanumeric entries of up to 16 characters), only if speed-dialing numbers have been entered1
13				Account Code (ACCT)
13	1			Code entries, list 0 to 999
13	2			Checking procedure 0 = Not checked, 1 = Acc. code list, 2 = Number of digits
13	3			Entry procedure 0 = Optional, 1 = Mandatory
13	4			Code length (1 to 11)
14				Set up station
14	10			Copy station data
14	11			Station type
14	11	0		Standard
14	11	1		Fax
14	11	2		PhoneMail (5 digits)
14	11	3		Loudspeaker
14	11	4		Answer Machine
14	11	5		External MOH
14	11	6		P.O.T MW LED
14	11	7		PhoneMail (6 digits)
14	11	8		Door station with pulsed loop
14	11	9		Memo
14	11	10		Modem
14	12			Station names (alphanumeric), up to 16 character1
14	13			Override: 0 = denied, 1 = allowed
14	14			Associated Dialing: 0 = denied, 1 = allowed
14	15			DISA: 0 = denied, 1 = allowed
14	16			Call waiting rejection: 0 = off, 1 = on
14	17			Headset 0 = off, 1 = on
14	18			Call pickup group:   HiPath 3550/HiPath 3500: Groups 1 to 16, max. 32 stations   HiPath 3350/HiPath 3300: Groups 1 to 8, max. 8 stations
14	19			Reset station PIN: 0 = Reset to 00000
14	20			Override do not disturb 0 = no, 1 = yes
14	21			Missed Calls List: 0 = no, 1 = yes
14	22			MCID: 0 = denied, 1 = allowed
14	23			Call FWD, external: 0 = denied, 1 = allowed
14	25			Data compression 0 = no, 1 = yes
14	26			Select language: 11 = German   12 = US English   13 = French   14 = Spanish   15 = English 16 = Italian   17 = Dutch 18 = Portuguese   19 = Finnish   20 = Czech   21 = Danish   22 = Swedish   23 = Norwegian   24 = Turkish   25 = Telekom, German   26 = Polish   27 = Hungarian   28 = Russian   29 = Greek   30 = Slovenian   31 = Serbo-Croatian   32 = Estonian   33 = Latvian   34 = Lithuanian   35 = Chinese   36 = Slovakian   37 = Catalonian   38 = German (2)   39 = English (2)   40 = Romanian   41 = Bulgarian   42 = Macedonian   43 = Serbian (cyr.)   44 = Serbian (lat.)
14	27			Do not Disturb: 0 = off, 1 = on
14	28			Telephone lock intercept: 0 = no, 1 = yes
14	29			Dialing method: 1 = DTMF, 2 = DP
14	30			optiPoint BLF (busy lamp field or BLF), Display: No BLF, one BLF, two BLFs
14	31			Ringback protection per station
14	32			Setup station in internal phonebook: 0 = no, 1 = yes
14	33			Edit tel. number 0 = no, 1 = yes
14	34			Monitoring: 0 = not authorized, 1 = authorized
14	35			Keypad dial: 0 = not authorized, 1 = authorized
14	36			Forwarding CFSS
14	37			Speaker calling
14	38			Bar speaker calling
15				CO call privileges
15	1			Direct trunk access day; specify reference station   Enter new data:   0 = No trunk access except by system speed-dialing   1 = Incoming only   2-7 = Allowed list, Allowed list 1-6   8-13 = Denied list, Denied list 1-6   14 = Full access
15	2			Direct trunk access night; specify reference station   Enter new data:   0 = No trunk access except by system speed-dialing   1 = Incoming only   2-7 = Allowed list, Allowed list 1-6   8-13 = Denied list, Denied list 1-6 14 = Full access
15	3			Allowed lists
15	3	1		Allowed list 1, 100 entries
15	3	2		Allowed 2, 10 entries
15	3	3		Allowed 3, 10 entries
15	3	4		Allowed 4, 10 entries
15	3	5		Allowed 5, 10 entries
15	3	6		Allowed 6, 10 entries
15	4			Denied lists
15	4	1		Denied list 1, 50 entries
15	4	2		Denied 2, 10 entries
15	4	3		Denied 3, 10 entries
15	4	4		Denied 4, 10 entries
15	4	5		Denied 5, 10 entries
15	4	6		Denied 6, 10 entries
15	5			Number of authorized stations (for verification purposes only)
15	6			Telephone lock   0 = No trunk access except by system speed-dialing   1 = Incoming only   2 - 7 = Allowed lists 1-6 (AL 1 to AL 6)   8 - 13 = Denied lists 1-6 (DL 1 to DL 6)   14 = Full access (full)
15	7			Toll restriction, 0 = Digit-by-digit, 1= En-bloc sending
15	8			Switched trunk authorization
15	9			Toll restriction, private
16				Incoming calls
16	10			Internal station numbers
16	10	1		Station
16	10	1	1	Boards
16	10	1	2	Change station number
16	10	1	3	Find station number
16	10	2		Groups
16	11			DID numbers; (internal) station number is displayed; enter (new) station number
16	12			Intercept position, day; enter new destination, group or Stn. no., max. 6 digits
16	13			Intercept position, night; enter new destination, group or Stn. no., max. 6 digits
16	14			Intercept criteria
16	14	1		on RNA: 0 = no, 1 = yes
16	14	2		on Busy
16	14	2	1	Intercept 0 = no, 1 = yes
16	14	2	2	Call waiting on busy: 0 = no, 1 = yes
16	14	3		on Invalid, intercept: 0 = no, 1 = yes
16	14	4		on Incomplete, intercept: 0 = no, 1 = yes
16	14	5		on Automatic recall, intercept: 0 = no, 1 = yes
16	15			Hunt/group call
16	15	1		Called station no.; select group and assign destination
16	15	2		Ring type; select group and type:   1 = Circular hunt group   2 = Linear hunt group   3 = Group call   4 = Group call, no answer   5 = Basic MULAP   6 = Executive MULAP   7 = Group call, call waiting
16	15	3		Group name, select group and enter name (alphanumeric)1
16	15	4		Select host (master)/executive, group, and station (only stations that are not the host (master) telephone in another group)
16	16			Call allocation, day; select slot/trunk and assign station no.
16	17			Call allocation, night; select slot/trunk and assign station no.
16	18			Call forwarding-no answer
16	18	1		Select call destination list and destination index (1 - 4).   Call destination lists:    •   up to and including V1.2 = 70  •   V3.0 or later =    -   376 for HiPath 3550, HiPath 3500    -   70 for all other systems Select destination (1 - 4), possible entries:    •   targeted call number of a station or a group  •   * = identical to called station  •   #9 = system search of all stations except for the executive extensions  •   #201 - #260 = uniform call distribution group 01 to group 60  •   #301 - #316 = announcement device 01 to 16  •   an external destination, in other words call numbers in satellites and in the central office
16	18	2		Internal calls; select station/group:    •   up to and including V1.2 = 70  •   V3.0 or later =    -   1 - 376 for HiPath 3550, HiPath 3500    -   1 - 70 for all other systems
16	18	3		External calls, day; select station/group:    •   up to and including V1.2 = 1 - 70  •   V3.0 or later =    -   1 - 376 for HiPath 3550, HiPath 3500    -   1 - 70 for all other systems
16	18	4		External calls, night; select station/group:    •   up to and including V1.2 = 1 - 70  •   V3.0 or later =    -   1 - 376 for HiPath 3550, HiPath 3500    -   1 - 70 for all other systems
16	18	5		Number of rings (1 to 15) for station/group
16	18	6		Night bell, location for station/group
16	18	7		Night bell, mode: 1 = Immediate connect, 2 = After timeout
16	18	8		Call forwarding (CF) on busy, 0 = Do not forward call, 1 = Forward call
16	19			Ring cadence: 0 = Ring type 1, 1 = Ring type 2, 2 = Ring type 3
16	20			DTMF DID: 0 = denied, 1 = allowed
16	21			Ringback protection (Brazil): 0 = off, 1 = on
17				Networking
17	11			Simplified dialing: 0 = Off, 1 = On
17	12			Assign trunk group; select slot/trunk and assign trunk group   Route 1-8 (HiPath 3350, HiPath 3300)   Route 1 - 16 (HiPath 3550/HiPath 3500)
17	13			Overflow route; select route and assign overflow route
17	14			Trunk type CO/CS; select trunk type: 0 = CO, 1 = CS
17	15			Route name, select route and enter name (alphanumeric)1
17	16			Route seizure; Route selection: 0=cyclic, 1= linear
17	17			Rerouting (optimized B channel utilization)
17	17	1		Route optimize active: 0 = No, 1 = If route is known, 2 = Always
17	17	2		Change route: 0 = denied, 1 = allowed
17	18			Central intercept
17	19			Call data routing
17	19	1		Destination system
17	20			Digit repetition; select trunk group: 0 = off, 1 = on
17	21			Path optimization: 0 = no, 1 = yes
17	22			QSig: Voice mail
17	22	1		Callback access number
17	22	2		Callback access name
17	23			QSig: Busy signaling
17	23	1		Stations: 0 = no, 1 = yes
17	23	2		Station number, destination system
17	23	3		System number, destination system
17	24			Station number type: 1 = Internal, 2 = DID, 3 = Internal/DID
18				Traffic restriction
18	1			Configure exec./sec. groups; select group, enter:   1 = Exec. 1, 2 = Exec. 2, 3 = Sec. 1, 4 = Sec. 2   HiPath 3550/HiPath 3500: Group 1-10   HiPath 3350/HiPath 3300: Group 1-4
18	2			Hotline
18	2	1		Hotline destinations   HiPath 3550/HiPath 3500 Destination 1-6   HiPath 3350/HiPath 3300: Destination 1
18	2	2		Hotline station number
18	2	2	1	Hotline Mode: 0 = Off, 1 = Hotline, 2 = Off-hook alarm after timeout
18	2	2	2	Hotline assignment   HiPath 3550/HiPath 3500 1-6   HiPath 3350/HiPath 3300 1
18	2	3		Hotline timeout, 1-99 x s
18	3			ITR groups (internal traffic restriction groups)
18	3	1		Group assignment
18	3	1	1	Station
18	3	1	2	Lines, select slot/line
18	3	1	3	Speed-dialing number assignment
18	3	1	3-1	Minimum speed-dialing group, Select group, 0 to 999
18	3	1	3-2	Maximum speed-dialing group, Select group, 0 to 999
18	3	2		Connection groups
18	3	2	1	Matrix, Select Group: 0 = no, 1 = yes
19				Displays
19	11			Text messages: select message no. 0 to 9 and enter a text containing up to 24 characters (alphanumeric)1
19	12			Advisory messages: select message no. 0 to 9 and enter a text containing up to 24 characters (alphanumeric)1
19	13			Enter 4-digit time in the format HHMM (hour minute)
19	14			Enter 6-digit date in the format DDMMYY (day month year)
19	15			Call duration: 0 = off, 1 = on
19	16			Name, Call numbers: 0 = Calling ID only, 1 = Name, 2 = Name and calling ID
19	17			Automatic recall 1 = Caller, 2 = Transferred destination
19	18			Transfer before answer: 1 = Transferred by, 2 = Transferred to
20				ISDN parameters
20	1			Call number suppression 0 = off, 1 = on
20	2			System station number - incoming
20	2	1		Station number; select trunk group
20	2	2		National number; select trunk group
20	2	3		International number; select trunk group
20	2	4		Type, outgoing; select trunk group: 0 = Unknown, 1 = Station, 2 = National, 3 = International, 4 = Internal
20	2	5		National prefix (U.S. = 1)
20	2	6		International prefix (U.S. = 011)
20	3			Reference clock
20	3	1		Allowed nos. list; select position (slot and port)
20	3	2		Denied nos. list; select position (slot and port)
20	4			EU parameters (not for U.S.)
20	4	1		S0 port configuration; select slot/port and determine connection type (not for U.S.):   1 = Automatic   2 = Euro CO PP   3 = Euro CO PMP   4 = Euro bus   5 = CorNet 1   6 = CorNet 2   7 = ECMA-QSIG   8 = ISO-QSIG
20	4	2		S2M port configuration; select slot/port and determine connection type (not for U.S.):   1 = Euro CO PP   2 = CorNet 1   3 = CorNet 2   4 = ECMA-QSIG   5 = ISO-QSIG
20	4	3		S0 bus MSN (for verification purposes only)
20	4	4		Call forwarding PMP
20	4	4	1	Multiple subscriber numbers, select index, 1 to 10
20	4	4	2	MSN trunks, select index, 1 to 10
20	5			US parameters (for U.S. only)
20	5	1		BRI parameter
20	5	1	1	CO/protocol:   1 = AT&T/NI 1   2 = AT&T/Custom   3 = Siemens/NI 1   4 = NT/NI 1
20	5	1	2	SPID admin, select station, select slot/port
20	5	1	3	CAID admin, stn., select CAID
20	5	1	4	PDID admin, stn., select PDID
20	5	1	5	FIN - for message waiting
20	5	1	6	CACH EKTS, select slot/port: 0 = off, 1 = on
20	5	2		PRI parameters
20	5	2	11	Protocol type:   11 = AT&T/Custom   12 = AT&T/NI2   13 = AT&T/NI2 OSA   14 = AT&T/4ESS   15 = Siemens/Custom   16 = Siemens/Custom OSA   17 = Siemens/NI2   18 = Siemens/NI2 OSA   19 = MCI/DEX600   20 = MCI/DMS250   21 = BELL/DMS100   22 = BELL DMS100 TNS   23 = Nortel/DMS100   24 = Nortel DMS100 TNS   25 = SPRINT/DMS250   26 = Westinghouse   27 = FTS/DMS250   28 = FTS/5ESS   29 = GENERIC/NI2   30 = GENERIC/NI2 OSA   31 = QSIG   32 = IDA-P
20	5	2	12	Frame/line/encod, select slot   0 = ESF/B8ZS/Normal   1 = SF/ZCS/Inverted
20	5	2	13	Inwats parameter
20	5	2	13-1	Direction
20	5	2	13-2	DNIS
20	5	2	13-3	Entrance telephone ring destination
20	5	2	14	Calling service, select trunk group   11 = NONE   12 = AT&TSDN-GSDN   13 = AT&TSDDN   14 = MCI-VN-VS   15 = SPRINT-VPN   16 = WICN-PV   17 = MEG800-TFM   18 = MCI 800   19 = ULTRA-800   20 = WICN-INWATS   21 = MEG   22 = MCI-PRISIM-WATS   23 = SPR-ULTRA-WATS   24 = WICN-OUTWATS   25 = ACCU-SDS   26 = LDS-WC-TSAA   27 = INTER-800   28 = MULTIQUEST   29 = MCI-900   30 = SDS56   31 = SDS64C   32 = SDS64R   33 = DMS100-PV   34 = DMS100-INWATS   35 = DMS100-OUTWATS   36 = DMS100-FX   37 = 5ESS-INWATS   38 = WATS-MSB   39 = DMS100-TIE   40 = NI2-INWATS   41 = NI2-OUTWATS   42 = NI2-FX   43 = NI2-TIE   44 = NI2-HOTEL   45 = NI2-SCOCS   46 = CALL-BY-CALL 1   47 = CALL-BY-CALL 2   48 = CALL-BY-CALL 3   49 = CALL-BY-CALL 4   50 = WATS-BANDED
20	5	2	15	CBC pool:   11 = AT&TSDN-GSDN   12 = AT&TSDDN   13 = MCI-VN-VS   14 = SPRINT-VPN   15 = WICN-PV   16 = MEG800-TFM   17 = MCI 800   18 = ULTRA-800   19 = WICN-INWATS   20 = MEG   21 = MCI-PRISIM-WATS   22 = SPR-ULTRA-WATS   23 = WICN-OUTWATS   24 = ACCU-SDS   25 = LDS-WC-TSAA   26 = INTER-800   27 = MULTIQUEST   28 = MCI-900   29 = SDS56   30 = SDS64C   31 = SDS64R   32 = DMS100-PV   33 = DMS100-INWATS   34 = DMS100-OUTWATS   35 = DMS100-FX   36 = 5ESS-INWATS   37 = WATS-MSB   38 = DMS100-TIE   39 = NI2-INWATS   40 = NI2-OUTWATS   41 = NI2-FX   42 = NI2-TIE   43 = NI2-HOTEL   44 = NI2-SCOCS
20	5	2	16	CBC access code
20	5	3		S0 bus MSN, select slot/port
20	5	4		QSig: S0 parameter
20	6			QSIG parameter
20	6	1		System number
20	6	2		Group number
20	7			Keypad dial: 0 = denied, 1 = allowed
20	8			System station number - outgoing
20	8	1		Port number
20	8	2		National number
20	8	3		International number
20	8	4		Suppress station number
21				Analog CO interface
21	1			Dialing method; select slot/trunk:   0 = Automatic, 1 = DTMF, 2 = Dial pulses 3 = MFC-R2, 4 = MFC-R2 with OAD
21	2			Delayed dialing; select trunk group:   0 = No pause, 1 = 1 s, 2 = 3 s, 3 = 6 s, 4 = 9 s
21	3			Trunk call pause; select trunk group: 1 = 6 s, 2 = 13 s
21	4			Line Length; select slot and trunk: 0 = Short 1 = Long
21	5			Charge data module, select slot/trunk: 0 = off, 1 = on
21	6			Silent reversal: 0 = no, 1 = yes
21	7			Port status: 0 = on, 1 = Off (SW), 2 = Off (HW), 3 = Off (HW, SW)
21	8			Allocated without extension
22				System settings
22	11			Music on Hold (MOH): 0= Off, 1 = No ring tone, 2 = Ring tone, 3 = Announcement device 1
22	12			Internal Phonebook: 0 = No, 1 = Internal, 2 = LDAP, 3 = All
22	13			V.24 (RS-232) configuration
22	13	1		Select CB baud rate: 1 = 9600 baud, 2 = 2400 baud, 3 = 19200 baud
22	13	2		Port assignment
22	13	2	1	CSTA/CDRC (call detail recording central), output: 0 = none, 1 = V.24 port, 2 = UPN port, 3 = PC-VPL, 4 = LAN
22	13	2	2	Port for CDRS (call detail recording at station), output: 0 = none, 1 = V.24 port, 2 = UPN port
22	13	2	3	Port for CDRT (call detail recording per trunk), output: 0 = none, 1 = V.24 port, 2 = UPN port
22	13	2	4	Port for CDB printout
22	13	2	5	Port for CDR printout
22	13	2	6	Port for CDRA (call detail recording, attendant); if a pay phone is configured, also see code 11 8), output: 0 = none, 1 = V.24 port, 2 = UPN port
22	14			Call FWD, external
22	14	1		Connect call: 0 = On answer, 1 = Immediately.
22	14	2		Call forwarding: 0 = deactivate, 1 = activate
22	15			Caller list mode: 1 = Only external, 2 = External and Internal, 3 = External ring/call
22	16			Applications
22	16	1		Call distribution: 0 = no, 1 = yes
22	17			Tones
22	17	1		Conference, Warning tone: 0 = off, 1 = on
22	17	2		Call pickup, Warning tone: 0 = off, 1 = on
22	18			Transfer key (Retrieve): 1 = Press once, 2 = Press twice
22	19			Class of service
22	19	1		Night answer, Pos. 1-5; enter station
22	19	2		Central telephone lock
22	20			DTMF automatic: 0= no, 1 = yes
22	21			Key click: 0=Off, 1= Volume 1 ... 4 = Volume 4
22	22			DTMF - Pulse/Pause: 1 = 70/70 msec, 2 = 80/80 msec, 3 = 80/250 msec, 4 = 200/200 msec
22	23			Phone lock destination
22	24			Stn. relocate: 0 = denied, 1 = allowed
22	25			Trunk reservation: 0 = off, 1 = on
22	26			Speaking volume: 0 = default, 1 = high
22	27			CO features (Transfer/Conference/Drop): 0 = disabled, 1 = enabled
22	28			Feature Identification Number (FIN) for Transfer (for U.S. only)
22	29			Feature Identification Number (FIN) for Conference (for U.S. only)
22	30			Feature Identification Number (FIN) for Drop (for U.S. only)
22	31			MSN default: 0 = off, 1 = on
22	32			DTMF hidden: 0 = off, 1 = on
22	33			Announcement with connection: 0 = denied, 1 = allowed
22	34			MFC-R2 parameters
22	34	1		Ringback protection
22	34	2		DID digits
22	35			Common hold
22	35	1		By hanging up
22	35	2		Without hanging up
22	36			Switch line, DSS: 0 = no, 1 = yes (Status 1 = U.S., Status 0 = Rest of World (ROW)
22	37			Advisory call 0 = off, 1 = on
22	38			Trace stop facility
22	38	1		Stop trace
22	38	1	01	Assistant: 0 = inactive, 1 = active
22	38	1	09	HW: 0 = inactive, 1 = active
22	38	1	12	Processor: 0 = inactive, 1 = active
22	38	1	15	APSXF: 0 = inactive, 1 = active
22	38	1	16	General: 0 = inactive, 1 = active (error 19 cannot be set to inactive)
22	38	1	20	CP: 0 = inactive, 1 = active
22	38	1	21	DH: 0 = inactive, 1 = active
22	38	1	23	Network: 0 = inactive, 1 = active
22	38	1	26	Presence 0 = inactive, 1 = active
22	38	1	28	Recovery: 0 = inactive, 1 = active
22	38	1	29	IO Process: 0 = inactive, 1 = active
22	38	1	30	LW: 0 = inactive, 1 = active (0 to n)
22	38	1	11	LW date: 0 = inactive, 1 = active (41 to n)
22	38	2		Reset 1 = Delete all, 2 = System default
22	39			IP access
22	39	1		IP interface, mode:   0 = Inactive   1 = HIP Forwarding   2 = LIM   3 = SLIP Routing
22	39	2		IP address, data (7 ... 15): x.x.x.x (x = 0 ... 255)   Use either "*" or "." as a separator.
22	39	3		Subnet mask
22	39	4		Gateway IP address
22	40			Open numbering
22	40	1		Active/inactive
22	40	2		Voice mail node number
22	40	3		Node number
22	41			UCD permanently available: 0 = inactive, 1 = active
23				Code
23	1			Substitute code *, code 75
23	2			Substitute code #, code 76
23	3			Trunk access code; select slot and trunk and enter new code
23	4			Route code; Select route followed by position 1-10 for code and enter new code   Route 1-8 (HiPath 3350HiPath 3300, )   Route 1 - 16 (HiPath 3550/HiPath 3500)
23	5			Attendant code
23	5	1		Attendant code DID
23	5	2		Attendant code internal
23	6			Second trunk access code
23	7			Reset telephone lock code
23	8			Hotel terminal
24				Door relay
24	1			Entrance phone; select door, max. 6 digits, door 1-4
24	2			Destination; select door, max. 6 digits, door 1-4
24	3			Door opener; select door: 0 = not available, 1 = available, 2 = available with DTMF, doors 1-4
24	4			Call forwarding, door, external; select door: 0 = do not run, 1 = run
24	5			Door opener, DTMF, select station: 0 = denied, 1 = allowed
25				Announcement/Music
25	1			Announcement devices
25	1	1		In system (select announcement device 1 ... 16)
25	1	2		Via server (select announcement device 1 ... 16)
25	2			Type of ann., select ann. device: 1 = Ann. type, 2 = Music on hold, 3 = Internal music
25	3			Announcement prior to answer; select slot and trunk
25	4			External MOH   (Only enter analog line module stations.)
26				Relays
26	1			Type; select relay 1 to 4 and assign function:   11 = Manual on and off   12 = Off after timeout   13 = Door opener   14 = Speaker amplifier (starting contact for amplifier)   15 = Busy display   16 = Music on hold   17 = Call charge pulse   18 = Second bell   19 = Station active   20 = Announcement
26	2			Switching time   Select relay 1 through 4 and enter up to 3 digits (0 to 255)
26	3			Assigned station   Select relay 1 through 4 and enter stations or groups (up to 5 digits)
26	4			Relay name; select relay 1 to 4, enter a name containing up 16 characters (alphanumeric)1
27				Sensors (HiPath 3550/HiPath 3350/HiPath 3500/HiPath 3300 only)
27	1			Sensor type: 0 = Alarm, 1 = Call distribution
27	2			Destination station no.; select sensor 1 - 4   External station with seizure code (trunk/direction)   Internal station with station prefix (if programmed)
27	3			Station no. for announ.; select sensor 1 - 4 and enter station or group number (max. 6 digits)
27	4			Infobox control data; select sensor 1 - 4 and enter control characters 0 - 9, *, #, max. 24 digits
27	5			Call duration; select sensor 1 through 4 and enter 1 to 255
27	6			Call pause; select sensor 1 through 4 and enter 0 to 255
27	7			Number of rings; select sensor 1 through 4 and enter 1 to 255
27	8			Block time; select sensor 1 through 4 and enter 0 to 255
27	9			Sensor text; select sensor 1 to 4, enter text containing up 16 characters (alphanumeric)1
28				Edit CDB
28	1			Print CDB data
28	2			Save CDB data
28	2	1		CDB to MMC
28	2	2		CDB from MMC
29				System details
29	1			System
29	1	1		System type (for verification purposes only)
29	1	2		SWversion (for verification purposes only)
29	2			Status display
29	2	1		Call forwarding, external, 0 = Off, 1 = On (for verification purposes only)
29	2	2		Night service, 0 = Off, 1 = On (for verification purposes only)
29	2	3		Trunk, 0 = Inactive, 1 = Active (for verification purposes only)
29	2	4		Ping, 1 = IP address, 2 = Start
29	2	5		MAC address
29	3			Options (HiPath 3550, HiPath 3350, HiPath 3500 and HiPath 3300 only)
29	3	1		Type per option (for review only)   1 = Relays   2 = Call detail recording   3 = Fax/DID   4 = ANI   5 = Announcement (Beyer)
29	3	2		Software version for each option (1 to 16) (for verification purposes only)
29	3	3		Reset options
29	4			Boards
29	4	1		Board type, select slot:   11 = TMS2   12 = TMST1 - digital   13 = TIEL   14 = TMDID   15 = TML8W   16 = TMOM   17 = TMGL8   18 = TLA2   19 = TLA4   20 = TLA8   21 = TS2N   22 = TMGL2   23 = TMGL4   24 = TMQ2   25 = TMQ4   26 = TST1 - digital   27 = STMD   28 = STLS2   29 = STLS4   30 = SLA16   31 = SLMO8   32 = SLMO24   33 = SLMC8 (CMI V1)   34 = 4SLA / SLAD4   35 = 8SLA / SLAD8   XX = DIUT2
29	4	1		Board type, select slot:   36 = 16SLA   37 = SLU8   38 = ILAN   39 = SLC16 (CMI V2.2M)   42 = SLMO8K   43 = SLMO24K   44 = SLA8N   45 = SLA16N   46 = SLA24N   47 = TMAMF   48 = CR8   49 = SLU4 (Octopus E 10)   50 = SLU2 (Octopus E 10)   52 = HXGS (HiPath 3550, HiPath 3350, HiPath 3500, HiPath 3300)   53 = IVMS8   54 = IVML8   55 = IVML24   56 = SLAS16   57 = TMCAS   58 = SLUC8 (UP0/E interfaces on CBCC, CBRC, CBCP)   59 = SLUC4 (UP0/E interfaces on SBSCO)   60 = SLUC2 (UP0/E interfaces on SBSCS)   61 = SLAS4N   62 = SLAS8N   63 = IVMP8   64 =   65 = HXGS3   66 = SLC16N   67 = STMD2   68 = STLS2N   69 = STLS4N   70 = SLMO2
29	4	1		Board type, select slot:   71 = TMEW2   72 = DIUN2   73 = SLMA8   74 = SLMA3   75 = SLMA2   76 = SLMO8_HP4K   77 = STMD3   78 = SLCN   79 = STMI2   80 = IVMN8   81 = IVMNL   82 = TM2LP   83 = TMDID_HP4K   84 = TMC16   85 = DIU2U   86 = EVM2   87 = TS2N   88 = STMD3 (feeding)
29	4	2	xx	Reset board (for board no., see 29-4-1)
29	4	3	0-9	Board status
29	4	4		Disable/enable board
29	5			Country initialization
29	5	1		Variable password
29	5	1	00 to 99	See Select country code
29	5	2		Fixed password
29	5	2	00 to 99	Select country code   11 = Germany   12 = Netherlands   13 = France   14 = Finland   15 = United Kingdom   16 = Italy   17 = Spain   18 = Portugal   19 = Switzerland   20 = Austria   21 = International   22 = Ireland   23 = Belgium   24 = Brazil   25 = South Africa   26 = China   28 = India   29 = Czech Republic   30 = Denmark   31 = Australia   32 = Argentina   33 = Philippines   35 = Brazil 2   36 = Singapore   37 = Hungary   38 = Malaysia   40 = Indonesia   41 = Russia   42 = Thailand   46 = Poland   47 = Greece   49 = Sweden   50 = Norway   51 = Turkey   52 = U.S.   53 = Pakistan   54 = Hong Kong   55 = New Zealand   56 = Taiwan   57 = Korea
29	6			Virtual subscribers
29	6	1		Configure stations
29	6	2		Display stations
30				Remote service
30	1			DTMF access: 0 = No access, 1 = Access as host (primary), 2 = Access as client (secondary), 3 = Host and client (primary and secondary)
30	2			ISDN trunk access: 0 = Enable procedure, 1 = Logon (DID) without PIN, 2 = Logon (DID) with PIN, 3 = Callback
30	3			Other access: 0 = Enable procedure, 1 = Logon without code, 2 = Logon (DID) with code, 3 = Callback
30	4			Reset password
30	5			Integrated modem
30	5	1		Station number, remote service, max. 6 digits
30	5	2		DID number, remote service
30	5	3		CAID admin (for U.S. only)
30	6			Digital modem
30	6	1		Station number, remote service, max. 6 digits
30	6	2		DID number, remote service
30	6	3		CAID admin (for U.S. only)
30	7			Callback connection
30	7	1		Destination; select position (1-6)
30	7	2		Password; select position (1-6)
30	7	3		X.75 protocol: 0 = no, 1 = yes
30	8			Automatic CDB printout: 0 = no, 1 = yes
30	9			USBS D channel access
30	9	1		Station number, remote service
30	9	2		DID number, remote service
31				Call distribution
31	1			Group assignment; select group ID
31	2			Group parameters
31	2	1		Announcement device; select group   HiPath 3550/HiPath 3350/HiPath 3500/HiPath 3300: Announcement device 1-4
31	2	2		Wait times; select group, time: 1-9 x 30s
31	2	3		Call cycles
31	2	3	1	Primary cycles; select group
31	2	3	2	Secondary cycles; select group
31	2	4		AICC connection; select group 0 = off, 1 = on
31	2	5		Max. waiting calls; select group
31	3			Wrap-up time: 0 = no wrap-up time, 1-20 = wrap-up x 30s
31	4			Call priority external; select slot/trunk
31	5			Call priority internal
32				Paging
32	1			PSE port (slot and trunk)
32	3			Protocol: 1 = ESPA 4.4.5, 2 = ESPA 4.4.3
32	4			Operating mode
32	4	1		Mode urgent
32	4	2		Mode normal
32	4	3		Mode text
32	5			Display
32	5	1		Call number
32	5	1	1	Number of digits
32	5	1	2	Display, filler: 0=none, 1=left, 2=right
32	5	1	3	Filler
32	5	2		Text
32	5	2	1	Number of digits
32	5	2	2	Display, filler: 0=none, 1=left, 2=right
32	5	2	3	Filler
32	6			PSE data transfer; select sequence: 1 = Operating mode, 2 = Call no., 3 = Text
32	7			PSE dial assignment; select station (not for U.S.)
32	8			PSE dial numbers; select index
33				Attendant
33	1			Queued calls
33	3			Speed extending: 0 = denied, 1 = allowed
33	4			Extend undialed lines : 0 = denied, 1 = allowed
34				DISA
34	1			Day/night. select slot / line: 0 = None, 1 = Only night, 2 = Only day, 3 = Day and night
34	2			DID number
34	3			Security mode: 0 = by time, 1 = by #
34	4			CAID admin (for U.S. only)
35				Least Cost Routing (LCR)
35	1			LCR on or off: 0 = off, 1 = on
35	2			Digit transmission: 0 = Digit-by-digit, 1= En-bloc sending
35	3			Dial rule
35	3	1		Name; select line
35	3	2		Format; select line
35	3	3		Type, select line: 0 = undefined, 1 = Main network supplier, 2 = 1-level, 3 = 2-level, 4 = CN, 5 = DICS, 6 = PRI
35	4			Authorization code; select index (1-16)
35	5			Schedule
35	5	1		Time limit; select day index (1 = Monday to 7 = Sunday) and time format (hhmm)
35	5	2		Timezone; select day index (1 = Monday to 7 = Sunday) and time period 1-8
35	6			Class of service (1 to 15); select station
35	7			Route tables
35	7	1		Route; select table/line
35	7	2		Assign dial rule; select table/line
35	7	3		Min. authorization; select table/line
35	7	4		Assign timezone; select table/line
35	7	5		Warning, select table/line: 1 = none, 2 = display, 3 = tone, 4 = display and tone
35	8			Dial plan
35	8	1		Dialed digits; select line
35	8	2		Assign route table; select line
35	8	3		Account codes: 0 = no, 1 = yes
35	8	4		Toll restriction, private: 0 = no, 1 = yes
35	8	5		Toll restriction: 0 = no, 1 = yes
35	8	6		Emergency number
36				HiPath Cordless Office
36	1			Log on CMI unit; select device: 1 = inactive
36	2			CMI code; select device
36	3			CMI number; select device, changes not possible
36	4			Reset cordless code
36	5			DECT identification, data:   1. E/ARC   2. EIC   3. FPN   4. FPS
37				Security
37	1			Change password
51 - 63				Customer administration (previously Manager TC)
52				Time, hour/minute
53				Date, ddmmyy
55				Station names
56				Text messages
57				Advisory messages
58				Select language
59				Group names
61				Hotline
61	1			Hotline destinations
61	2			Hotline station
61	2	1		Hotline mode, 0 = Off, 1 = Hotline, 2 = Code blue
61	2	2		Hotline assignment
61	3			Hotline timeout
62				Codes, remote service
63				Codes, Cordless
The "bolded" messages only appear on workpoints that support alphanumeric character entry.1

1Alphanumeric characters can only be entered at the following workpoints: optiPoint 600 office (in UP0/E mode), optiPoint 410 advance, optiPoint 420 advance and OpenStage 40/60/80.