13.1.2  
SIP / SIP-Q 
 

Networks  
In HiPath 3000/5000 V7 and later systems, networking is possible via:
 •   SIP with HiPath 2000 / HiPath OpenOffice EE, HiPath 3000, HiPath 4000 and HiPath 5000
 •   SIP-Q V2 with HiPath2000/HiPath OpenOffice EE, HiPath 3000, HiPath 4000, HiPath 5000 and OpenScape Voice
In HiPath 3000 V8 and HiPath 4000 V5 and later systems, only SIP-Q V2 protocol is used for IP networking between these systems and only CorNet-NQ is used for TDM networking. CorNet-IP protocol is no longer supported.  

SIP  
SIP (Session Initiation Protocol) is a network protocol for establishing, controlling and ending a communication sessions between two or more stations. Actual payload is exchanged via other protocols, such as SDP (Session Description Protocol) and RTP (Realtime Transport Protocol).

SIP-Q  
SIP-Q V1 (SIP-QSig) is a network protocol enhanced by the QSig signaling protocol. QSig is in turn enhanced by CorNet-NQ. In SIP-Q V1, QSig (incl. CorNet-NQ) is tunneled via SIP. This enables more features to be implemented between the communication systems.
QSig is a signaling protocol based on ISDN for networking communication systems from different manufacturers.
In addition to SIP-Q V1, SIP-Q V2 features the encryption protocol TLS (Transport Layer Security) for signaling and the transport protocol SRTP (Secure RTP) for encrypting payload. For networking with HiPath 4000, the features SPE (Signaling and Payload Encryption) and DMC (Direct Media Connection) are also supported. For each DMC call, one B channel is available.

HiPath 3000/5000 V9, Service Documentation, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2012-06-25