13.9.2 |
CSTA via IP |
| The Transmission Control Protocol (TCP) is used for CSTA via IP. A permanent connection is set up. Data packet loss is detected and automatically corrected. |
| For HiPath 3000, the following number of server applications may be connected per system: |
| • | up to one in HiPath 3300/3350, HiPath 3500/3550 |
| • | up to four in HiPath 3800 |
| Restrictions may apply to applications that use certain services. For example, only one application at a time can start the message registration function. |
| For an external application to address HiPath 3000/5000, it must know the TCP port (7001) of the TCP/IP server implemented in HiPath 3000/5000 as well as the IP address. Data packets sent from an application to HiPath 3000/5000 - that is, packets containing the HiPath IP address, TCP port 7001, and protocol type TCP - are accepted for further processing. |
| HiPath 3000 V7 and later systems support CSTA monitoring of connections to ITSPs. This enables call center applications, for example, to be used, even if SIP trunks are used. |
Model-specific data |
| |
LIM / LIMS |
| LIM/LIMS is released in HiPath 3800 for administration, fault management and accounting. No other features or protocols are supported via LIMS! |
| LIM for HiPath 33x0 and HiPath 35x0 can be used for CTI/CSTA applications in conjunction with TAPI 120 (up to 6 stations). No other features or protocols are supported via LIM! |
| HiPath 3000/5000 V9, Service Documentation, Issue 7 | up |
|
|
||
| Disclaimer & Copyright | ID: P31003H3590S100017620 | 2012-06-25 |