13.5 LIM/LIMS board for LAN connection

13.5	LIM/LIMS board for LAN connection

The boards LIM and LIMS allow the cost-effective connection of HiPath 3000 in TCP/IP-based LANs for the central system administration, APS transfer, TeleData Office or HiPath Fault Management.

The LAN Interface Module LIM is an optional plug-in card for all central control boards of HiPath 3000 with the exception of the CBSAP (HiPath 3800), the CBCC (HiPath 3550, HiPath 3350) from S30810-Q2935-A401 or later, and the CBRC (HiPath 3500, HiPath 3300) from S30810-Q2935-Z401 or later. The board provides an Ethernet (10BaseT/10 megabit) LAN connector via an 8-pin RJ45 jack.

The LAN Interface Module for SAPP LIMS is an optional plug-in card for the CBSAP central control board in HiPath 3800. The board provides two Ethernet (10BaseT) LAN connectors via two 8-pin RJ45 jacks:

Up to 6 TAPI 120 V2.0 can be operated via the LIM module on HiPath 3000 V4.0 SMR6 or later. However, a maximum traffic value of 400 BHCA is permitted.

Power dialers are not released for use.

HiPath 3000/5000 V9, Service Documentation, Issue 7		up

Disclaimer & Copyright	ID: P31003H3590S100017620	2012-06-25