Caution   Place the central control board on a flat surface before inserting a subboard. Otherwise you may damage the board.

The following HiPath Xpressions Compact boards support music on hold in V4.0 SMR-7 or later and announcements in V5.0 or later:    •   IVMNL, IVMN8 (HiPath 3800)  •   IVMP8 (not for U.S.) and IVMP8R (not for U.S.) (HiPath 3350, HiPath 3300)  •   IVMS8, IVMS8R (HiPath 3550, HiPath 3350, HiPath 3500, HiPath 3300) For detailed information on HiPath Xpressions Compact, startup and administration, see the manual for the product.

Table 3-179

Announcement and Music Modules

Module / Board	Part number	Use
EXM	S30817-Q902-B401	•   Used in HiPath 3550 and HiPath 3350 (wall housing), see Figure 3-132.  •   Connected via cable to X4 connector on CBCC/CBCP.
EXMNA (for U.S. only)	S30807-Q6923-X	•   Implemented in HiPath 3550, HiPath 3350 (wall housing), see Section 3.4.7 "EXMNA (for U.S. only)".
EXMR	S30122-K7403-Z   S30122-K7403-T	•   Implemented in HiPath 3550, HiPath 3350 (wall housing), and HiPath 3500, HiPath 3300 (19" housing).  •   Module installed directly on CBCC/CBRC (X19 and X20).  •   Wall housing: Direct connection to external music source (see Figure 3-133).  •   19" housing: Connected via cable to cinch jack on the front panel (see Figure 3-134).
UAM (not for U.S.)	S30122-X7217-X	•   Used in HiPath 3550 and HiPath 3350 (wall housing).  •   Connected to OPAL and T/R interface (for the announcement function)
UAMR (not for U.S.)	S30122-X7402-Z	•   Used in HiPath 3500 and HiPath 3300 (19-inch housing).  •   Connected to OPALR and T/R interface (for the announcement function)
Telroth Modules
MUSIC plug-in module (internal music on hold) L30250-U600-A337, CUA337	S30122-K7275-T	•   Use in all HiPath 3000 systems  •   The module is plugged directly on the central control board CBCC/CBRC (X19 and X20) of HiPath 3550/3350 and HiPath 3500/3300
Sound Player eMusic   L30251-U600-A722, DUA722	S30122-X8005-X8	•   Connection via analog interface or via 3.5 mm jack plug at an EXMR board  •   Music is transferred online as an e-mail attachment to the Sound Player eMusic. Following initial startup, no further service intervention is required for music on hold.
Module of BEYERTONE GmbH
MPPI	S30122-K7275-B	•   Use in all HiPath 3000 systems  •   The module is plugged directly on the central control board CBCC/CBRC (X19 and X20) of HiPath 3550/3350 and HiPath 3500/3300

Figure 3-132

EXM Slot for HiPath 3550 and HiPath 3350 Wall Housing

Figure 3-133

EXMR connection to HiPath 3550 and HiPath 3350

Figure 3-134

EXMR Connection to HiPath 3500 and HiPath 3300