NOTE   Danger of damage to property due to surge voltage. The required lightning protection measures must be taken for this board, see Section 2.1.2 "Lightning Protection".

The peripheral board slots on the HiPath 3800 are fitted with SIPAC 9 SU connectors. Since the TMDID board has SIVAPAC connector strips, you will have to install a SIVAPAC-SIPAC board adapter in order to be able to use it in HiPath 3800.   For information on this procedure, please see Section 4.1.5.5 "Installing the SIVAPAC-SIPAC Board Adapter".

Table 3-152

TMDID (for U.S. only) - LED Statuses

LED status    0 - 7	Meaning
Off	The trunk circuit is free.
On	The trunk circuit is assigned.
Slow flashing	The trunk circuit was deactivated by the software.
Fast flashing	The switch was pressed and the trunk circuit was selected for manual activation or deactivation.

Figure 3-108

TMDID (for U.S. only) (S30810-Q2452-X) - Front Panel

To ensure sufficient shielding, provide the board with a shielding panel. For information on mounting the shielding panel, see Section 4.1.5.3 "Inserting or Removing Boards".

Table 3-153

TMDID (for U.S. only) - SIVAPAC Connector Assignment on the Backplane

Pair	a-wire (tip)1	b-wire (ring)1	SIVAPAC connector	TMDID		MDFU-E	Notes
1	wht/blu		1	1a	Port 1	1a
		blu/wht	23	1b		1b
2	wht/ora		3	2a	Port 2	2a
		ora/wht	4	2b		2b
3	wht/grn		5	3a	Port 3	3a
		grn/wht	6	3b		3b
4	wht/brn		7	4a	Port 4	4a
		brn/wht	8	4b		4b
5	wht/gry		9	5a	Port 5	5a
		gry/wht	10	5b		5b
6	red/blu		11	6a	Port 6	6a
		blu/red	12	6b		6b
7	red/ora		13	7a	Port 7	7a
		ora/red	14	7b		7b
8	red/grn		15	8a	Port 8	8a
		grn/red	16	8b		8b
9	red/brn		17		Free
		brn/red	18
10	red/gry		19		Free
		gry/red	20
11	blk/blu		24		Free
		blu/blk	25
12	blk/ora		26		Free
		ora/blk	27
13	blk/grn		29		Free
		grn/blk	30
14	blk/brn		31		Free
		brn/blk	32
15	blk/gry		34		Free
		gry/blk	35
16	yel/blu		37		Free
		blu/yel	38

1see "Abbreviations for colors" at the start of Section 3.3 "Peripheral boards".

Table 3-154

TMDID (for U.S. only) - Connector Panel Assignment with CHAMP Jack

CHAMP jack	TMDID			Notes
1	1a	1 Ring	Port 1
26	1b	1 TIP
2	2a	2 Ring	Port 2
27	2b	2 TIP
3	3a	3 Ring	Port 3
28	3b	3 TIP
4	4a	4 Ring	Port 4
29	4b	4 TIP
5	5a	5 Ring	Port 5
30	5b	5 TIP
6	6a	6 Ring	Port 6
31	6b	6 TIP
7	7a	7 Ring	Port 7
32	7b	7 TIP
8	8a	8 Ring	Port 8
33	8b	8 TIP
9			Free
34
10			Free
35
11			Free
36
12			Free
37
13			Free
38
14			Free
39
15			Free
40
16			Free
41

Table 3-155

TMDID (for U.S. only) - Connector Panel Assignment with SIPAC1SU Connectors (Cable for Ports 1 - 16)

Color Group	Pair	a-wire (tip)1	b-wire (ring)1	SU connector	TMDID		MDFU-E	Patch Panel, MW8 pin	Notes
1	1	wht/blu		19	1a	Port 1	1a	4
			blu/wht	39	1b		1b	5
	2	wht/ora		38	2a	Port 2	2a	4
			ora/wht	48	2b		2b	5
	3	wht/grn		27	3a	Port 3	3a	4
			grn/wht	47	3b		3b	5
	4	wht/brn		16	4a	Port 4	4a	4
			brn/wht	46	4b		4b	5
	5	wht/gry		05	5a	Port 5	5a	4
			gry/wht	45	5b		5b	5
2	6	red/blu		14	6a	Port 6	6a	4
			blu/red	44	6b		6b	5
	7	red/ora		23	7a	Port 7	7a	4
			ora/red	43	7b		7b	5
	8	red/grn		32	8a	Port 8	8a	4
			grn/red	42	8b		8b	5
	9	red/brn		11		Free
			brn/red	31
	10	red/gry		02		Free
			gry/red	22
3	11	blk/blu		13		Free
			blu/blk	33
	12	blk/ora		04		Free
			ora/blk	24
	13	blk/grn		15		Free
			grn/blk	35
	14	blk/brn		06		Free
			brn/blk	26
	15	blk/gry		17		Free
			gry/blk	37
4	16	yel/blu		08		Free
			blu/yel	28

1see "Abbreviations for colors" at the start of Section 3.3 "Peripheral boards".