Topic
Section 3.1 "Functional and model overview of the boards"
Section 3.2 "Central Board"
Section 3.3 "Peripheral boards"
Section 3.4 "Options"

CAUTION   The system must be disconnected from the power source before removing or inserting any boards in HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300, and before removing or inserting the central boards in HiPath 3800.

NOTE   Danger of damage to property due to surge voltage: Lines exiting buildings of the boards listed below must be protected with an additional primary protection against overvoltage caused by lightening strikes (see also Section 2.1.2 "Lightning Protection").

•   CBCC, CBRC, CBSAP	•   STLSX2, STLSX4, STLSX4R	•   TMDID, TMDID2
•   SLA8N, SLA16N, and SLA24N	•   STMD3, STMI2	•   TMEW2
•   SLAD4, SLAD8, SLAD8R	•   TCAS-2, TCASR-2	•   TMGL4, TMGL4R
•   SLAD16	•   TLA2, TLA4, TLA8, TLA4R	•   TMQ4, TST1
•   SLC16N, SLCN	•   TM2LP, TMAMF	•   TS2N (old: TS2), TS2R
•   SLMAE8, SLMAE	•   TLANI2, TLANI4, TLANI8	•   4SLA, 8SLA, 16SLA
•   SLMA, SLMA8, SLMA2	•   TLANI4R	•   8SLAR
•   SLMAV8, SLMAV24	•   TMANI, TMANI-IM, TMANI-BRA	•   ALUM4, ANI4, ANI4R
•   SLMO2, SLMO8, SLMO24	•   TMC16, TMCAS, TMCAS-2	•   GEE12, GEE16, GEE50
•   SLU8, SLU8R	•   TST1	•   REALS, STBG4
•   STLS2, STLS4, STLS4R

NOTE (for Brazil only)   Danger of damage to property due to surge voltage: For protection against overvoltage due to lightning, the use of the lightning protection strip with part number C39334-Z7052-C33 is absolutely mandatory. The power supply cable of the HiPath 3000 must be plugged into the lightning protection strip. The lightning protection strip should be connected to the line voltage.