9.10.18 IP Ports

9.10.18	IP Ports

Settings | Network |IP Ports

IP Ports can be used to display and modify the IP ports for the applications. A change in the IP ports may be needed to adapt the ports to the customer-specific firewall, for example. Activation of the modified ports occurs with the next restart of the system/application.

If the port number for the HiPath 3000 Manager (Application ADM) was changed in the system, then the port number must be specified in addition to the IP address (IP-address:port) when transferring the CDB (see Transfer | Communication).

9.10.18.1

IP Ports table

The IP Ports table contains all applications for which the IP port can be modified. To change an IP port for an application, enter the value for the new IP port in the Port no. column.

Table 9-7

IP ports default value

Application

Port-no.

H225_CS

1720

RTP_MIN

29100

RTP_MAX

29259

H.323_DYN_MIN

12250

H.323_DYN_MAX

12950

H225_RAS

1719

VOPTISET

4060

IPNC

12051

MPH

12052

DSL_DIAG

12200

REG

12061

CAR

12062

CAR Server

12063

H225_CS_RESERVE

4711

ADM

7000

SYNCH

7024

FCT

7100

Ressource Manager RM

9000

SIP Port

5060

H323-TLS

1300

SIP-TLS

5061

HFA-TLS

4061

Check button

The IP ports must be unique. If you have modified ports, you can check whether the specified ports are unique by using the Check button. If a value for a port has been specified more than once, a corresponding message is issued.

All KDS equal button

This button is used to provide all lists of IP ports in all communication systems of a network environment with uniform values.

In a networked system, or if multiple CDBs are loaded, the current ports of the CDB being displayed are copied to all other CDBs.

Set Default button

This button is used to assign changed IP ports back to the original default value.

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 7		up

Disclaimer & Copyright	ID: P31003H3590M1000176A9	2012-06-25