9.7.6 Overview

9.7.6	Overview

Settings | Classes of service | Overview

Overview can be used to set up service groups and classes of service (e.g., night service).

9.7.6.1

Authorized station for night service table

When the communication system is switched to night service, all stations use the for night service table. In addition, all incoming calls are switched to Night in the Assignment table. If you want particular stations to have the ability to switch the communication system to night mode, you must enter these stations to the list of stations in the Authorized Station for Night Service list.

The maximum number of stations that can be authorized for night service is five.

9.7.6.2

Mobility supervisor table

For authorized stations, the station flags Associated dialing/services (see Station view: Flags) and Relocate (see Flags) must be activated.

Only system clients are authorized.

9.7.6.3

Stations, Change, New, Delete

To Change a number:

1.	Select the number that you want to change in the list. The number is displayed in the Stations drop-down list.

2.	Select the new station from the Stations drop-down list.

3.	Click the Change button.

To create (New) a new list or to add a number to an existing list:

1.	Select the new station from the Stations drop-down list.

2.	Click the New button. The new number will be added to the list.

To Delete a number:

1.	Select the number that you want to delete in the list.

2.	Click the Delete button. The number will be removed from list.

9.7.6.4

Area: Switched trunk authorization

In this field, you must configure a station with unrestricted trunk access, otherwise Deflect Call to an external destination will not be possible.

9.7.6.5

Area: Class of service with active codelock

The Class of service drop-down list box is used to define which COS is to apply to stations that have been blocked. This COS will usually be a very restricted level, thus preventing unauthorized calls from being made in the absence of the station's authorized user.

One of the 15 system-wide CO call privileges (see Day or Night) can be configured here. These are valid when a station has an activated codelock. The class of service sequence corresponds to that of the drop-down list.

The COS can only be reduced when the codelock is active.

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 7		up

Disclaimer & Copyright	ID: P31003H3590M1000176A9	2012-06-25