9.4.2 |
Buttons |
Copy flags |
| Copy function with which the ISDN or main station interface (MSI) flags that were temporarily stored for a line earlier using the Template button can be applied to any other line (see also the Template button under Trunks | Parameter/ISDN flags). |
Check |
| If the trunk codes are changed, the consistency of the codes isn't checked until the Check key is activated. Therefore, the codes can be entered into the table first and then a complete check of the uniqueness of the codes can be implemented. |
| If consistency errors appear during the check, the codes that are not unique are displayed in a separate window. The corresponding lines in the trunk table must then be corrected. |
| If you make changes to the trunk codes, you can perform a check to ensure that you have not assigned any duplicate codes. If you have entered the same code for two trunks, the communication system displays a list of the duplications. You can then change one of the duplicate codes so that each code is unique. |
| HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 7 | up |
|
|
||
| Disclaimer & Copyright | ID: P31003H3590M1000176A9 | 2012-06-25 |