9.4.14 |
IP trunks for HG 1500 |
| IP Trunks is used to configure the trunks for the inserted HG 1500 boards. |
9.4.14.1 |
Area: Selection |
Gatekeeper HG 1500 |
| Under HG 1500 Gatekeeper, select the HG 1500 board plugged into the communication system that is configured as a gatekeeper (see also Settings | Set up station | Gatekeeper). |
Enable gateway resources flag |
| This flag is used to free up the gateway resources from the gatekeeper card for the system. |
9.4.14.2 |
Trunks table |
| The table shows all the lines that have been set up for the HG 1500 board. |
Number, Add |
| The number of trunks to be newly configured are specified here. In total, up to 8, 16 or 64 trunks can be configured depending on the board. A higher number of trunks will be ignored. |
|
| Options: |
| • | In HiPath 3000 V5.0 and higher, trunks are no longer assigned on a group basis but on a system basis |
| • | In HiPath 3000 V6.0 SMR09 and later, you can choose between the following options when adding trunks: |
| - | - SIP Provider 1 ... 4 |
| - | - Trunking |
| - | - Ext. Registrar |
| - | - Ext. Gatekeeper |
| Each of these options is assigned a separate route. |
| The Ext. Registrar option is needed when using the SIP protocol to connect to a communication system. |
| The Ext. Gatekeeper option is needed when using the H.323 protocol to connect to a communication system. |
Selected line, Delete |
| All selected lines are deleted by pressing Delete. |
Configured line |
| This field shows the number of trunks configured for the HG 1500 board. |
| HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 7 | up  |
|
 |
||
| Disclaimer & Copyright | ID: P31003H3590M1000176A9 | 2012-06-25 |
