9.2.5 |
Terminal hw sw version |
| The hardware/software version of the terminals is made up of the current OpenStage SW versions in MMC and a table, in which the number, the name, the type, the location as well as the current software and hardware version of the terminals are displayed. |
| The table is often not fully visible. In order to see all entries, use the horizontal scroll function or reduce the width of the columns by moving the column separators. |
9.2.5.1 |
Area » Current OpenStage SW Versions in MMC« |
| The current software version is displayed here which is available on the MMC card for upgrading OpenStage T devices. |
9.2.5.2 |
Table |
Call Number column |
| The internal number of each IP terminal is displayed here. No number is displayed for IP terminals which have been added to Manager E but which are not yet registered in the system. |
Name column |
| This column displays the name of the station. |
Type column |
| This column displays the terminal type of OpenStage and optiPoint IP telephones. |
Column: Current SW Version |
| The current software version of the OpenStage and optiPoint IP terminals registered on the system is displayed here. No software version is displayed for IP terminals which have been added to Manager E but which are not yet registered in the system. |
Column: HW Version |
| The hardware version of the OpenStage terminals which are registered on the system is displayed here. |
Column: Access |
| The slot location of the respective IP terminal is displayed here. |
| |
| HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 7 | up  |
|
 |
||
| Disclaimer & Copyright | ID: P31003H3590M1000176A9 | 2012-06-25 |
