8.19.4  
Maintenance | Restart/Reload 
 
Restart/reload can be used to
   -   restart the entire system.
When you restart the system, you reboot it with the database intact.
   -   reload individual cards.
Note that a reload operation always reloads only one card at a time.
It is important to recognize that neither of these commands is equivalent to a Reload function. The Reload function would wipe out the existing database and revert to the original German default.  

8.19.4.1  
HXG - Remote initial startup 

Slot / card, DID  
To start HXG - Remote for the first time:
 1.   In the DID field, enter the relevant DID number for each HXG card (up to three).
 2.   Click Accept data.
You can now communicate with the remote HXG card via an S0 call.

8.19.4.2  
Area: System 

Hard restart  
If you select the Hard Restart option, you will restart the entire system.

8.19.4.3  
Area: Reset/reload card 

Slot/card, Activate Reload Card, Read card information  
To start reloading an individual card:
 1.   Click the Read card information button.
 2.   Select the appropriate card from the Slot/card drop-down list.
 3.   Click the Activate Reload Card button.

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590M1000176A9   2012-06-25