10.3  
Supported features, depending on networking protocol 
 

10.3.1  
HiPath 3000/5000 Networking Features 
 

Boundary conditions  
The following boundary conditions apply:
 •   TDM networking
Systems with different software versions can be networked. Each system only provides the features available in the corresponding software versions.
 •   IP trunking
Networking is not supported for systems with different software versions. In addition, all HG1500 boards in a system must have the same software version.
    As of HiPath 3000/5000 V7 R4, the EFC protocol must be activated (default) for all systems in an IP network. EFC is mandatory in order to be able to fully use all features.

Supported Features  
Meaning of abbreviations: --- = not relevant, Y = implemented, N = not implemented

 Table 10-5   HiPath 3000/5000 Networking Features V9
 Features  
 Abbreviation  
 ECMA-QSIG  
 ISO-QSIG  
 CorNet-N
(TDM Network)  
 CorNet-NQ
(TDM Network)  
 SIP-Q V2 (IP Network)  
Basic Call (Q.931)  
BC  
 Y  
 Y  
 Y  
 Y  
 Y  
 
 
   
   
   
   
   
Segmentation  
 
 Y  
 Y  
 ---  
 Y  
 ---  
 
 
   
   
   
   
   
Generic Procedures  
 
   
   
   
   
   
Generic Functional Procedures (ROSE ADPUs)  
GF  
 Y  
 Y  
 ---  
 Y  
 Y  
Requirements of GF for a Transit PBX  
 
 Y  
 Y  
 ---  
 Y  
 Y  
Generic Procedures for the control of supplementary services for unsuccessful calls  
 
 Y  
 Y  
 Y  
 Y  
 Y  
Transport of Manufacturer Specific Information  
 
 Y  
 Y  
 ---  
 Y  
 Y  
Classmarks  
 
 ---  
 ---  
 Y  
 Y  
 Y  
 
 
   
   
   
   
   
Call Completion  
CC  
   
   
   
   
   
Call Completion to busy subscriber  
CCBS  
 Y  
 Y  
 Y  
 Y  
 Y  
Call Completion on no reply
Callback on Free  
CCNR  
 Y  
 Y  
 Y  
 Y  
 Y  
 
 
   
   
   
   
   
Busy Calls  
 
   
   
   
   
   
Call Intrusion  
CI  
 Y  
 Y  
 N  
 Y  
 Y  
Call Offering  
CO  
 Y  
 Y  
 N  
 Y  
 Y  
Call Waiting  
CW  
 Y  
 Y  
 N  
 Y  
 Y  
 
 
   
   
   
   
   
Number Identification  
 
   
   
   
   
   
Calling Line
Identification Presentation  
CLIP  
 Y  
 Y  
 Y  
 Y  
 Y  
Calling Line
Identification Restriction  
CLIR  
 Y  
 Y  
 Y  
 Y  
 Y  
Connected Line Identification Presentation  
COLP  
 Y  
 Y  
 Y  
 Y  
 Y  
Connected Line
Identification Restriction  
COLR  
 Y  
 Y  
 Y  
 Y  
 Y  
 
 
   
   
   
   
   
Name Identification  
 
   
   
   
   
   
Calling/Connected Name
Identification Presentation  
CNIP  
 Y  
 Y  
 Y  
 Y  
 Y  
Calling/Connected Name
Identification Restriction  
CNIR  
 Y  
 Y  
 Y  
 Y  
 Y  
 
 
   
   
   
   
   
Do Not Disturb (Override) / Do Not Disturb  
DND/DNDO  
 N  
 N  
 N  
 N  
 N  
 
 
   
   
   
   
   
Call Diversion  
 
   
   
   
   
   
Call Forwarding Unconditional  
CFU  
 Y  
 Y  
 Y  
 Y  
 Y  
Call Forwarding Busy  
CFB  
 Y  
 Y  
 Y  
 Y  
 Y  
Call Forwarding No Reply  
CFNR  
 Y  
 Y  
 Y  
 Y  
 Y  
Call Deflection  
CD  
 N  
 N  
 N  
 N  
 N  
 
 
   
   
   
   
   
Charging Features  
 
   
   
   
   
   
Advice of Charge at Call Setup  
AOC-S  
 N  
 N  
 N  
 N  
 N  
Advice of Charge during Call  
AOC-D  
 Y  
 Y  
 Y  
 Y  
 Y  
Advice of Charge at the end of the call  
AOC-E  
 Y  
 Y  
 Y  
 Y  
 Y  
 
 
   
   
   
   
   
Additional Network Features  
 
   
   
   
   
   
Path Replacement
(Path optimization)  
PR  
 Y  
 Y  
 Y  
 Y  
 Y  
Rerouting  
 
 Y  
 Y  
 Y  
 Y  
 N  
Message Waiting Indication  
MWI  
 Y  
 Y  
 Y  
 Y  
 Y  
Malicious Call Identification  
MCID  
 ---  
 ---  
 ---  
 N  
 N  
User-to-User Signaling  
UUS  
 ---  
 ---  
 Y  
 Y  
 Y  
Hold/Enquiry/Alternating  
CH  
 Y  
 Y  
 Y  
 Y  
 Y  
Call Transfer  
CT  
 Y  
 Y  
 Y  
 Y  
 Y  
Conference  
CONF  
 Y  
 Y  
 Y  
 Y  
 Y  
Recall (Retrieval of Transferred Calls)  
RE  
 Y  
 Y  
 N  
 Y  
 Y  
Single-Step Call Transfer (Blind Transfer)  
SSCT  
 Y  
 Y  
 N  
 Y  
 Y  
Emergency Call  
ECS1  
 N  
 N  
 Y  
 Y  
 Y  
Direct Media Connection  
DMC  
 N  
 N  
 N  
 N  
 Y  
 
 
   
   
   
   
   
Attendant  
 
   
   
   
   
   
Interception  
CINT  
 Y  
 Y  
 Y  
 Y  
 Y  
 
 
   
   
   
   
   
Private Numbering Plan  
PNP  
 N  
 N  
 ---  
 N  
 N  
 
 
   
   
   
   
   
Server/CSTA Features  
 
   
   
   
   
   
Call Identification and Linkage / Global Call ID  
CIDL  
 Y  
 Y  
 N  
 Y  
 Y  
 
 
   
   
   
   
   
Plus Features  
 
   
   
   
   
   
Routing of Charge Data  
CHT  
 Y  
 Y  
 N  
 Y  
 Y  
Routing of Busy Monitor Data  
EST  
 Y  
 Y  
 N  
 N  
 Y  
Change Class of Service  
RPC  
 Y  
 Y  
 N  
 Y  
 Y  
Reset telephone lock
(Reset telephone lock)  
RPC  
 Y  
 Y  
 N  
 Y  
 Y  
Call back to mailbox
(with Message Waiting Indication)  
 
 N  
 N  
 Y  
 Y  
 Y  
CSTA command information  
 
 ---  
 ---  
 N  
 Y  
 Y  
1HiPath 3000 supports ECS via CorNet-NQ in the following manner:
- ECS is set if a defined emergency number is dialed.
- Calls with ECS are forwarded first, wherever possible.
- ECS contains a LIN that can be displayed at a Public Safety Answering Point.
Further analysis, for example, special call signaling if the target is a HiPath 3000 client.

HiPath 3000/5000 V9, Feature Description, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2012-06-25