 |
|
|
|
10.17 |
Call Forwarding With Rerouting |
| Implementing features, see also Manager E Call Forwarding With Rerouting |
Definition |
| Calls can be rerouted for call forwarding via CorNet to optimize B channel utilization. |
| Subscriber A in system 1 calls subscriber B in system 2. Subscriber B has set call forwarding to subscriber C in system 1. The two B channels between CS 1 and CS 2 are released. This means that the connection is set up directly within CS 1. For this to be possible, both CSs must activate rerouting. |
| HiPath 3000/5000 users can forward their incoming internal and/or external calls to users within their own system, to a node within the private network, or off-site (if the feature is allowed in the system administration). Call forwarding-no answer is possible using Call Management pseudo ports in the HiPath 3000/5000 system. |
| Pseudo numbers are used for identification and steering purposes. A pseudo number is a call number/DID number assigned to a port not associated to a physical device. Pseudo numbers can be assigned in the "Set up Station" screen (HiPath 3000/5000 Manager E) and can be configured with a name and with Call Management control information. Pseudo numbers cannot be programmed as Repertory Dial (Redial) keys on the optiPoint or OpenStage telephones. Pseudo numbers can be forwarded using the Associated Services feature code (*83) from a station with the Associated Services authorization flag activated. |
| Rerouting can be defined in the database as follows: |
| • | Rerouting is deactivated |
| • | Reroute only if the route is known |
| • | Rerouting is always activated |
|
|
Model-Specific Data |
| |
| HiPath 3000/5000 V9, Feature Description, Issue 7 | up  |
|
|
||
| Disclaimer & Copyright | ID: P31003H3590F100017618 | 2012-06-25 |