9.6  
Associated Dialing 
 
Implementing features, see also Manager E Associated Dialing

Definition  
With a PC, users can have the system set up a voice connection from one station (typically their own, but not necessarily so) to another station within the system. With analog telephones, the PC uses a dialing aid interface (Teleint in Germany). Another option is to connect a PC to an ISDN S0 application bus.
Any authorized station in the system can execute associated dialing for another station. The user defines the station number of the destination station in the PC address book and activates dialing. The PC seizes the ISDN S0 application bus and transmits the station number to the system using an ISDN message.
The user accesses the function by dialing a code and specifying the station for which a number should be dialed. The system then interprets this information as though the specified station were dialing.
Associated dialing makes fast and convenient dialing support possible by means of the PC on the S0 bus or analog on an a/b interface. The link between the PC and the system telephone is established by a prefix in the call number of the target station. The prefix consists of an entry procedure and the internal call number of the system telephone for which dialing is performed. The user specifies the call number of the destination station in the PC address book (database) and then initiates dialing. The PC then accesses the S0 bus or a/b port (via modem) and sends the call number to the communication system. If the number is prefixed by the entry procedure *(75)+67+ ext. no. (n digits) + route code for associated dialing, the digits that follow are interpreted as if the station specified in the entry procedure were dialing.
If the system telephone is idle, the first digit activates the loudspeaker and microphone.

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 -  
 -  
 -  
Software requirements  
 V5.0 or later  
 V1.0 or later  
 V1.0 or later  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
Trunk group  
Depending on the system configuration, you may have to dial a trunk group code in order to seize a trunk.  
Call forwarding  
A call waiting operation activated on the station for which the number is to be dialed is not carried out.  

HiPath 3000/5000 V9, Feature Description, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2012-06-25