5.3.18  
Keypad Dialing 
 
Implementing features, see also Manager E Keypad dialing

Definition  
In some countries, network provider services are controlled using keypad dialing instead of functional control. To activate these services in the central office, you can use the stimulus interface of the HiPath 3000/5000.
The user acknowledges the message traffic using the display. As a result, keypad dialing can only be performed on telephones with a display (optiPoint, OpenStage), mobile telephones (HiPath cordless) with optiPoint menu navigation and IP telephones with stimulus interfaces.
An authorized station can activate keypad dialing using the service menu or using the *503 code. This is possible only in the idle state. Then the station must select an ISDN trunk that the feature can use.
The actions carried out using keypad dialing are not subject to any system control. HiPath 3000/5000 cannot prevent improper use, such as call charges fraud or trunk blocking.  
The customer must be informed that Siemens Enterprise Communications GmbH & Co. KG accepts no liability whatsoever for damages resulting from the improper use of this feature.  

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 digital trunk connection  
 Telephones with display (optiPoint, OpenStage), mobile telephones (HiPath cordless) with optiPoint menu navigation, or IP telephones with stimulus interfaces  
Software requirements  
 V5.0 or later  
 V1.2 or later  
 V1.2 or later  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
Telephone lock  
Keypad dialing cannot be used when the telephone lock has been activated.  
ISDN terminals  
ISDN telephones are not supported.  
Services  
Each network provider determines which services can be used with keypad dialing.  
Call detail recording  
Depending on the messages sent by the central office (such as when connecting), keypad dialing entries can have consequences for the call data recording. The number of the station using keypad dialing, the line used, and the time period when the feature was executed are protocolled.  

HiPath 3000/5000 V9, Feature Description, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2012-06-25