5.3.11 |
Traffic Restriction Groups |
| Implementing features, see also Manager E Traffic Restriction Groups |
Definition |
| Multiple traffic restriction groups (ITRs), also known as Connection Groups (CON), are provided in the system for all stations. These groups define information on toll restriction and trunk group reference (incoming or outgoing) for stations and trunks. |
| An ITR matrix defines whether a station |
| • | Is authorized to seize a trunk |
| • | Can seize a trunk only in the incoming or only in the outgoing direction |
| • | Can seize a trunk in the incoming and outgoing directions |
| • | Is authorized to seize certain speed-dialing destinations |
| • | Can access another station internally |
| The CON matrix permits or suppresses traffic between stations/lines within a subsystem and between subsystems. The CON matrix is configured system-wide. |
| The system default setting assigns all stations and trunks to ITR group 1. That is: all stations are allowed to seize all trunks in the system. Which of the six groups can connect to which other groups is entered in the matrix. |
| Tenant Service call restrictions should be defined with the ITR (CON). |
| The extension to 64 ITR groups as of HiPath 3000/5000 V7 facilitates station-specific gateway assignment. |
Model-Specific Data |
| |
Dependencies/Restrictions |
| HiPath 3000/5000 V9, Feature Description, Issue 7 | up ![]() |
|
![]() |
||
| Disclaimer & Copyright | ID: P31003H3590F100017618 | 2012-06-25 |