3.1.9  
Group Call with Busy Signaling 
 
Implementing features, see also Manager E Group Call with busy Signaling

Definition  
If a group member is busy, incoming calls to the group receive a busy signal. The call also camps on at the busy station.
This type of group (defined in Manager T as Grp call, RNA and in HiPath 3000/5000 Manager E as RNA under Type) functions in the similar manner as a Group Call arrangement. that is, when a new call enters an idle group, all member telephones ring. The first station to answer the call is connected to the calling party.
However, if there are any subsequent calls to the pilot number while one member is busy, the calls camp on to the busy extension. No other telephone in the group is signaled. The other members are nevertheless allowed to place outside calls and to receive calls if their individual station number is dialed.
This type of arrangement is useful where an optiPoint or an OpenStage telephone is associated with a wireless telephone.
Any type of telephone can be used in a Call Group.
Each Call Group can be assigned a name in the database with 16 characters maximum.

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 -  
 -  
 -  
Software requirements  
 V5.0 or later  
 V1.0 or later  
 V1.0 or later  
Groups/stations  
 800/20  
 150/20  
 20/8  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
Call waiting rejection  
The call does not camp on if the busy station has activated call waiting rejection.  
Direct inward dialing (DID)  
If a station in the group is called directly, the call is signaled at the dialed extension.  
Group  
If an optiPoint or OpenStage telephone in the group is defective, the group is treated as though it were busy.  

HiPath 3000/5000 V9, Feature Description, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2012-06-25