3.2.5  
Hotline 
 
Implementing features, see also Manager E Hotline

Definition  
With the hotline feature, the telephone automatically connects to a predefined internal or external destination after the user lifts the handset.
Users can also configure the feature so that the two locations connect only after a defined period (hotline after timeout). This delay is configured centrally and can be activated and deactivated on each station.
Call forwarding and call forwarding-no answer are evaluated at the destination.
If the Hotline Delayed station (originator) dials a digit before the timeout limit, the timer is canceled and the station is not forwarded to the Hotline destination whether another digit is dialed or not.

Hotline (Number)  
Up to six hotline destinations can be defined.

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 -  
 -  
 -  
Software requirements  
 V5.0 or later  
 V1.0 or later  
 V1.0 or later  
Hotline destinations  
 6  
 6  
 6  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
Do not disturb (DND)  
If the destination station is in Do not disturb (DND), the caller hears busy tone.  
Destination  
 •   If the internal destination is busy, the caller camps on.
 •   If the internal destination is a display telephone, the destination's display shows Call from: xxx, where xxx is the Hotline originator's station number.
 •   The destination can be an internal station, an external destination (in HiPath 3000/5000 Manager E or Manager T, up to 32 digits can be programmed) or a subscriber group.

HiPath 3000/5000 V9, Feature Description, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2012-06-25