3.2  
Features for General Outgoing Traffic 
 

3.2.1  
DTMF transmission during call Temporary signaling method changeover 
 
Implementing features, see also Manager E Dual-Tone Multifrequency Transmission (DTMF)

Definition  
When this feature is activated, all keystrokes that the user enters on the dialing keypad while engaged in an internal or external call are transmitted as DTMF digits.
Users can activate this feature:
 •   System-wide (automatic DTMF).
Users are automatically switched over to DTMF mode after each successful connection (even with CMI [not for U.S.]).
 •   Individually while engaged in an internal or external call by pressing a key or entering a code.
Afterwards, all keystrokes from the dialing keypad are transmitted as DTMF digits. The feature is activated temporarily and is deactivated when the handset is replaced.
DTMF mode remains activated even when the following features are activated: Transfer, Consultation hold, Toggle, Call pickup, Accepting a camped-on call
Users can configure the pulse/pause in the system. However, configuring the pulse/pause is not recommended. Contact your second-level service organization if required.

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 -  
 -  
 -  
Software requirements  
 V5.0 or later  
 V1.0 or later  
 V1.0 or later  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
Dial pulsing (DP) station  
DP stations cannot use this feature.  
Station on hold  
A station on hold cannot transmit any DTMF signals.  
Conference, call park, recall  
DTMF mode remains activated during a conference, during a recall, or in call park mode.  
Other features during DTMF mode  
When DTMF mode is active, you must always use the Program/Service key to activate features during a call.  
Voice mail  
DTMF mode is automatically activated when a station configured as voice mail is selected.  
US DTMF Default  
In the US, this default value for this feature is On.  

HiPath 3000/5000 V9, Feature Description, Issue 7   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2012-06-25