10.2.4  
Key Modules for optiPoint 410/410 S and 420/420 S 
 

Installing the key modules  
NOTE  
To avoid damage to property, the line cord must be disconnected before connecting the key module to the telephone.  
The user usually installs the add-on devices. The installation instructions are on the "Electronic Operating Instructions" CD.

Number of key modules  
Up to two add-on devices may be mounted on an optiPoint 410/optiPoint 410 S or optiPoint 420/optiPoint 420 S terminal (not optiPoint 410 entry, optiPoint 410 entry S, optiPoint 410 economy, optiPoint 410 economy S, optiPoint 410 economy plus, optiPoint 410 economy plus S, optiPoint 420 economy, optiPoint 420 economy S, optiPoint 420 economy plus and optiPoint 420 economy plus S).

10.2.4.1  
optiPoint self labeling key module 
The optiPoint self labeling key module is an add-on device that should be mounted on the side of the telephone; it provides an additional 13 keys, LEDs, and displays for all purposes. Self-labeling key means that each key is assigned a display (one line with 12 characters) in which the function or call number currently saved is shown.
 Figure 10-33   optiPoint self labeling key module
 
Information on double assignment can be found in Section 10.6 "Key Programming".
The bottom key of the first key module installed on the telephone (optiPoint self-labeling key module or optiPoint key module) is automatically defined as "Shift key" (default). This is the case if no Shift key was already programmed.

10.2.4.2  
optiPoint 410 display module 
This is an add-on device with a graphic swivel display (240 x 320 pixels) with touchscreen functionality, background illumination, and navigation keys.
 Figure 10-34   optiPoint 410 display module
 

Main features  
 •   Graphical user interface
 •   Local personal telephone directory
 •   Access to company-wide telephone directory via LDAP
 •   WAP browser
 •   Voice-controlled dialing
 •   Call list containing all incoming and outgoing calls
 •   Speed-dialing list
 •   Online help

Connection  
The optiPoint 410 display module must always be installed as the first add-on device, in other words, connected directly to the telephone.
The connection to the telephone is made over an interface cable with the following connectors: input MW6, output MW8. The power supply is ensured via the connected telephone.

10.2.4.3  
Possible Configurations for the Key Modules 
The following table shows the possible add-on device configurations for telephones from the optiPoint 410/optiPoint 410 S and optiPoint 420/optiPoint 420 S families. Add-on devices cannot be used on telephones that are not listed here.

 Table 10-5   Add-On Device Configurations for optiPoint 410/410 S and optiPoint 420/420 S
 optiPoint 410/optiPoint 410 S telephone  
 optiPoint 420/optiPoint 420 S telephone  
 First key module  
 2nd key module  
optiPoint 410 standard  
optiPoint 410 standard S  
 
optiPoint 410 advance  
optiPoint 410 advance S  
 
optiPoint 420 standard  
optiPoint 420 standard S  
 
optiPoint 420 advance  
optiPoint 420 advance S  
optiPoint key module  
-  
optiPoint key module  
optiPoint key module  
optiPoint key module  
optiPoint BLF  
optiPoint 410 display module  
-  
optiPoint 410 display module  
optiPoint key module  
optiPoint 410 display module  
optiPoint BLF  
optiPoint 410 display module  
optiPoint self labeling key module  
optiPoint BLF  
-  
optiPoint BLF  
optiPoint BLF1  
optiPoint self labeling key module  
-  
optiPoint self labeling key module  
optiPoint self labeling key module  
1Configuration with two optiPoint BLFs only with HiPath 3800

HiPath 3000/5000 V9, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2014-02-27