2.1.7  
Peripheral components of the HiPath 3000 systems 
 

2.1.7.1  
Peripheral components, HiPath 3800 

Subscriber Line Modules  

 Table 2-6   Subscriber Line Modules for HiPath 3800
 Board Name  
 Capacity  
 Country  
 Type/Description  
Ports per board  
B channels per board  
Boards per cabinet  
Max. number of
boards per system  
ROW
 
USA
 
IVMN8  
 8  
 8  
 1  
 1  
 x  
 x  
These boards are for the integrated voicemail functions of HiPath Xpressions Compact.  
IVMNL  
 24  
 24  
 1  
 1  
 x  
 x  
SLCN  
 16  
 64  
 4  
 4  
 x  
   
SLCN board for connecting base stations to the system.  
SLMA  
 24  
   
   
   
 x  
 x  
Board with 24 analog a/b interfaces
For Australia only: The T/R interfaces supply a ring voltage of 35 Veff. Depending on the terminals connected, we cannot exclude the possibility of errors occurring during ringing state.  
SLMA2  
 24  
   
   
   
 x1  
   
Board with 24 analog a/b interfaces  
SLMA8  
 8  
   
   
   
 x  
 x  
Board (8 analog interfaces)
For Australia only: The T/R interfaces supply a ring voltage of 35 Veff. Depending on the terminals connected, we cannot exclude the possibility of errors occurring during ringing state.  
SLMAE  
 24  
   
   
   
 x  
 x  
Board with 24 analog a/b interfaces  
SLMAE8  
 8  
   
   
   
 x  
 x  
Board (8 analog interfaces)  
SLMAV8  
 8  
   
   
   
 x  
 x  
The SLMAV boards provide analog T/R interfaces and replace the boards SLMAE, SLMA8, SLMAE200, SLMA and SLMA8.  
SLMAV24  
 24  
   
   
   
 x  
 x  
SLMO2  
 24  
 48  
   
   
 x  
 x  
The optiPoint and OpenStage telephones are connected via this board. The SLMO board comes in 8- and 24-port versions.  
SLMO8  
 8  
 16  
   
   
 x  
 x  
STMD3  
 8  
 16  
 6  
 8  
 x  
 x  
ISDN basic rate interface (BRI) board for configuring ISDN trunks, tie trunks, and subscribers on the same board.  
There are two versions of this board:  
 •   S0 interfaces without power supply
 •   S0 interfaces with power supply
STMI2  
 2  
 32  
 4  
 8  
 x  
 x  
HG 1500 board for the direct connection of IP workpoint clients.  
1SLMA2: For selected countries only

Trunk Boards  

 Table 2-7   Trunk Boards for HiPath 3800
 Board Name  
 Capacity  
 Country  
 Type/Description  
Ports per board  
B channels per board  
Boards per cabinet  
Max. number of
boards per system  
ROW
 
USA
 
TMCAS-2  
 2  
 60  
   
 3  
 x1  
 -  
Boards to support country-specific CAS (Channel Associated Signaling) protocols  
DIUN2  
 60  
 60  
   
 3  
 x  
 x  
Basic rate interface (BRI) board; can also be used for tie trunk traffic.  
In HiPath 3000/HiPath 5000 V5.0 and later, the B channels in the DIUN2 board must be licensed.  
DIU2U  
 48  
 48  
   
 4  
 -  
 x  
Board for T1-PRI trunk connection (PRI: Primary Rate Interface)  
DIUT2  
 60/48  
 60/48  
   
 3/42  
 x  
 x  
Boards for S2M trunk connection, T1-PRI (Primary Rate Interface) trunk connection (only for USA) and T1 analog trunk connection (only for USA).  
The B channels associated with the DIUT2 board require a license.  
STMD3  
 8  
 16  
   
   
 x  
 -  
ISDN basic rate interface (BRI) board for configuring ISDN trunks, tie trunks, and subscribers on the same board.  
There are two versions of this board:  
 •   S0 interfaces without power supply
 •   S0 interfaces with power supply
TMANI8  
 8  
   
   
   
 x  
 x  
Analog trunk board that supports the CLIP function.  
TMDID  
 8  
   
   
   
 -  
 x  
Analog trunk board for direct inward dialing  
TMDID2  
 8  
   
   
   
 x3  
 -  
Analog trunk board for direct inward dialing  
TMC16  
 16  
   
   
   
 -  
 x  
Analog trunk board (ground/loop start)  
TM2LP  
 8  
   
   
   
 x  
 x  
Board with 8 ports to connect LS trunk connections and enables CAS trunk connections  
1TMCAS-2: For selected countries only
2DIUT2: Up to 3 DIUT2 and/or DIUN2 per system. Up to 4 DIUT2 and/or DIU2U per system when used as T1 trunk connection.
3TMDID2: For selected countries only

Boards for Tie Trunk Traffic  

 Table 2-8   Tie Trunk Traffic Boards for HiPath 3800
 Board Name  
 Capacity  
 Country  
 Type/Description  
Ports per board  
B channels per board  
Boards per cabinet  
Max. number of
boards per system  
ROW  
USA  
DIUN2  
 60  
 60  
   
 3  
 x  
   
Board for primary rate access.  
In HiPath 3000/HiPath 5000 V5.0 and later, the B channels in the DIUN2 board must be licensed.  
DIUT2  
 60  
 60  
   
 3  
 x  
 x  
Board for S2M networking.  
The B channels associated with the DIUT2 board require a license.  
TMEW2  
 4  
   
   
   
 x  
 x  
Board for providing four two-way analog tie trunk circuits with E&M signaling.  
Note on compatibility in E&M networks: TMEW2 does not support E&M interface types 1, 1B, 2, 3, and 5 on the TIEL board.  
STMD3  
 8  
 16  
   
   
 x  
 x  
ISDN basic rate interface (BRI) board for configuring ISDN trunks, tie trunks, and subscribers on the same board.  
There are two versions of this board:  
 •   S0 interfaces without power supply
 •   S0 interfaces with power supply
STMI2  
 2  
 32  
 4  
 8  
 x  
 x  
HG 1500 board for connecting the HiPath 3800 system directly to a local IP network (Ethernet).  

Options  

 Table 2-9   Optional Boards for HiPath 3800
 Board Name  
 Capacity  
 Country  
 Type/Description  
ROW  
USA  
TMEW2  
Ports per board  
 4  
 x  
 x  
In addition to its tie trunk circuit function, this board can also be used for connecting announcement equipment (with start/stop signaling for announcement before answering).  
REALS  
Relay connections  
 4  
 x  
 x  
The REALS board is located on the basic cabinet's backplane. It can be used for connecting relays (door opener) and trunk switching (ALUM).  
Trunk failure transfers  
 1  
   
   
PFT1  
Trunk failure transfers  
 1  
 x  
 -  
PFT1 and PFT4 can be connected to the main distribution frame unit
(MDFU-E). They transfer calls from analog trunks to a telephone in a power failure (note the signaling method used).  
PFT4  
Trunk failure transfers  
 4  
 x  
 -  
LIMS  
   
 x  
 x  
Ethernet (10BaseT) interface  

2.1.7.2  
Peripheral components, HiPath 3550 

Subscriber Line Modules  

 Table 2-10   Subscriber Line Modules for HiPath 3550
 Board Name  
 Capacity  
 Country  
 Type/Description  
Ports per board  
B channels per board  
Max. number of
boards per system  
ROW  
USA  
4SLA  
 4  
   
 #1  
 x  
 -  
Board for connecting analog stations (a/b, T/R)  
8SLA  
 8  
   
 #1  
 x  
 x  
Board for connecting analog stations (a/b, T/R)  
16SLA  
 16  
   
 #1  
 x  
 -  
Board for connecting analog stations (a/b, T/R)  
HXGS3  
 2  
 8  
 3  
 x  
 x  
HG 1500 board for the direct connection of IP workpoint clients.  
IVMS8  
 8  
 8  
 1  
 x  
 x  
Board for the integrated voice mail functions in HiPath Xpressions Compact.  
IVMS8N  
 8  
 8  
 1  
 x  
 x  
Board for the integrated voicemail functions in HiPath Xpressions Compact (8 ports).  
IVMP4  
 4  
 4  
 1  
 x  
 x  
Board for the integrated voicemail functions in HiPath Xpressions Compact (4 ports).  
SLAD4  
 4  
   
 #1  
 x  
 x  
Board for connecting analog stations (a/b, T/R)  
SLAD8  
 8  
   
 #1  
 x  
 x  
Board for connecting analog stations (a/b, T/R)  
SLAD16  
 16  
   
 #1  
 x  
 x  
Board for connecting analog stations (a/b, T/R)  
SLU8  
 8  
 16  
 #1  
 x  
 x  
Board for connecting telephones with UP0/E interface (TDM)  
STLS2  
 2  
 4  
 #1  
 x  
 -  
Board for providing ISDN basic rate access.
Configuration of ISDN trunks, tie trunks, and subscribers (no feeding) on the same board is possible.  
STLS4  
 4  
 8  
 #1  
 x  
 x  
1The maximum number is calculated on the basis of the system-specific capacity limits, See Section 2.3 "System-Specific Capacity Limits for HiPath 3000, HiPath 5000".

Trunk Boards  

 Table 2-11   Trunk Boards for HiPath 3550
 Board Name  
 Capacity  
 Country  
 Type/Description  
Ports per board  
B channels per board  
Max. number of
boards per system  
ROW  
USA  
TCAS-2  
 2  
 601  
 1  
 x2  
 -  
Board for supporting country-specific
CAS (Channel Associated Signaling) protocols  
TLA  
 2  
   
 #3  
 x  
 -  
Trunk board for analog lines  
TLA4  
 4  
   
 #3  
 x  
 -  
Trunk board for analog lines  
TLANI2  
 2  
   
 #3  
 x  
 x  
Trunk board for analog lines including ALUM  
TLANI4  
 4  
   
 #3  
 x  
 x  
Trunk board for analog lines including ALUM  
TLANI8  
 8  
   
 #3  
 x  
 x  
Trunk board for analog lines including ALUM  
TLA8  
 8  
   
 #3  
 x  
 -  
Trunk board for analog lines  
TS2N  
 30  
 30  
 1  
 x  
 -  
Board for primary rate access; can be used for tie trunk traffic.  
In HiPath 3000/5000 V5.0 and later, the B channels in the TS2N board are subject to license. Consequently, the TS2N boards (S30810-Q2913-X300) have been assigned a new hardware identification code. The new code prevents the board from being used in earlier versions. Functionality and layout of the board have not been changed.  
STLS2  
 2  
 4  
 #3  
 x  
 -  
Board for ISDN basic rate access.
Configuration of ISDN trunks, tie trunks, and stations (no feeding) on the same board is possible.  
STLS4  
 4  
 8  
 #3  
 x  
 x  
TST1  
 1  
 24  
 1  
 -  
 x  
PRI board  
TMGL4  
 4  
   
 #3  
 -  
 x  
Trunk board for analog lines  
TMQ4  
 4  
 8  
 #3  
 -  
 x  
BRI board  
1TCAS-2 provides two E1 CAS interfaces which, combined, can support up to 60 B channels. As HiPath 3550 supports a maximum of 30 B channels, a total of up to 30 B channels may be used.
2For selected countries only
3The maximum number is calculated on the basis of the system-specific capacity limits, See Section 2.3 "System-Specific Capacity Limits for HiPath 3000, HiPath 5000".

Boards for Tie Trunk Traffic  

 Table 2-12   Tie Trunk Traffic Boards for HiPath 3550
 Board Name  
 Capacity  
 Country  
 Type/Description  
Ports per board  
B channels per board  
Max. number of
boards per system  
ROW  
USA  
HXGS3  
 2  
 8  
 3  
 x  
 x  
HG 1500 board for connecting the HiPath 3550 system directly to a local data network (Ethernet).  
STLS2  
 2  
 4  
 #1  
 x  
 -  
Board for ISDN basic rate access.
Configuration of ISDN trunks, tie trunks, and stations (no feeding) on the same board is possible.  
STLS4  
 4  
 8  
 #1  
 x  
 x  
TS2N  
 30  
 30  
 1  
 x  
 -  
Board for primary rate access; can be used for tie trunk traffic.  
In HiPath 3000/5000 V5.0 and later, the B channels in the TS2N board are subject to license. Consequently, the TS2N boards (S30810-Q2913-X300) have been assigned a new hardware identification code. The new code prevents the board from being used in earlier versions. Functionality and layout of the board have not been changed.  
1The maximum number is calculated on the basis of the system-specific capacity limits, See Section 2.3 "System-Specific Capacity Limits for HiPath 3000, HiPath 5000".

Options  

 Table 2-13   Optional Boards for HiPath 3550
 Board Name  
 Capacity  
 Country  
 Type/Description  
ROW  
USA  
ALUM4  
Trunk failure transfers  
 4  
 x  
 x  
Trunk failure transfer lets you transfer loop start trunks directly to internal analog stations in the event of a power failure (note the signaling method used).  
ANI4  
Analog
trunks  
 4  
 -  
 x  
This board allows calling line identification (caller ID) in conjunction with TMGL4.  
GEE12  
Number of call charge receivers  
 4  
 x  
 -  
This optional board records the country-specific call charge pulses (12 kHz) from the trunk.  
GEE16  
Number of call charge receivers  
 4  
 x  
 -  
This optional board records the country-specific call charge pulses (16 kHz) from the trunk.  
GEE50  
Number of call charge receivers  
 4  
 x  
 -  
This optional board records the country-specific call charge pulses (50 Hz) from the trunk.  
V24/1  
 1  
 x  
 x  
One serial V.24 interface for connecting a PC, printer, or Plus Products.  
STBG4  
 
x  
-  
Current-limiting module for LS interface (France only)  
EXM  
1  
x  
-  
External music on hold  
EXMNA  
Ports  
1  
-  
x  
External music on hold (A-LAW)  
MPPI (Product of BEYERTONE GmbH), or MUSIC (Product of Sound Player GmbH)  
 
x  
-  
Music on hold (MOH)  
UAM  
 
x  
-  
Announcement before answering/music on hold/relay/sensor  
STRB  
Sensors  
4  
x  
x  
Control relay module; provides 4 relays and 4 sensors for controlling external devices or detecting external control events.  
Relay  
4  
 
 

2.1.7.3  
Peripheral components, HiPath 3350 

Subscriber Line Modules  

 Table 2-14   Subscriber Line Modules for HiPath 3350
 Board Name  
 Capacity  
 Country  
 Type/Description  
Ports per board  
B channels per board  
Max. number of
boards per system  
ROW  
USA  
4SLA  
 4  
   
 2  
 x  
 -  
Board for connecting analog stations (a/b, T/R)  
8SLA  
 8  
   
 2  
 x  
 x  
Board for connecting analog stations (a/b, T/R)  
16SLA  
 16  
   
 2  
 x  
 -  
Board for connecting analog stations (a/b, T/R)  
HXGS3  
 2  
 8  
 1 (21)  
 x  
 x  
HG 1500 board for the direct connection of IP workpoint clients.  
IVMP4  
 4  
 4  
 1  
 x  
 x  
Board for the integrated voicemail functions in HiPath Xpressions Compact (4 ports).  
IVMP8  
 8  
 8  
 1  
 x  
 -  
Board for the integrated voicemail functions in HiPath Xpressions Compact (8 ports).  
IVMS8  
 8  
 8  
 1  
 x  
 x  
Board for the integrated voicemail functions in HiPath Xpressions Compact (8 ports).  
IVMS8N  
 8  
 8  
 1  
 x  
 x  
Board for the integrated voicemail functions in HiPath Xpressions Compact (8 ports).  
SLAD4  
 4  
   
 2  
 x  
 x  
Board for connecting analog stations (a/b, T/R)  
SLAD8  
 8  
   
 2  
 x  
 x  
Board for connecting analog stations (a/b, T/R)  
SLAD16  
 16  
   
 2  
 x  
 x  
Board for connecting analog stations (a/b, T/R)  
SLU8  
 8  
 16  
 2  
 x  
 x  
Board for connecting telephones with UP0/E interface (TDM)  
STLS2  
 2  
 4  
 2  
 x  
 -  
Board for ISDN basic rate access.
Configuration of ISDN trunks, tie trunks, and stations (no feeding) on the same board is possible.  
STLS4  
 4  
 8  
 2  
 x  
 x  
1The system may be configured with two HG 1500 boards if PDM1 is not used.

Trunk Boards  

 Table 2-15   Trunk Boards for HiPath 3350
 Board Name  
 Capacity  
 Country  
 Type/Description  
Ports per board  
B channels per board  
Max. number of
boards per system  
ROW  
USA  
TLA2  
 2  
   
 2  
 x  
 -  
Trunk board for analog lines  
TLA4  
 4  
   
 2  
 x  
 -  
Trunk board for analog lines  
TLA8  
 8  
   
 2  
 x  
 -  
Trunk board for analog lines  
TLANI2  
 2  
   
 2  
 x  
 x  
Trunk board for analog lines including ALUM  
TLANI4  
 4  
   
 2  
 x  
 x  
Trunk board for analog lines including ALUM  
TLANI8  
 8  
   
 2  
 x  
 x  
Trunk board for analog lines including ALUM  
STLS2  
 2  
 4  
 2  
 x  
 -  
Board for ISDN basic rate access.  
Configuration of ISDN trunks, tie trunks, and stations (no feeding) on the same board is possible.  
STLS4  
 4  
 8  
 1  
 x  
 x  
TMGL4  
 4  
   
 2  
 -  
 x  
Board for connecting analog trunks  
TMQ4  
 4  
 8  
 2  
 -  
 x  
BRI board  

Boards for Tie Trunk Traffic  

 Table 2-16   Tie Trunk Traffic Boards for HiPath 3350
 Board Name  
 Capacity  
 Country  
 Type/Description  
Ports per board  
B channels per board  
Max. number of
boards per system  
ROW  
USA  
HXGS3  
 2  
 8  
 1 (21)  
 x  
 x  
HG 1500 board for connecting the HiPath 3350 system directly to a local data network (Ethernet).  
STLS2  
 2  
 4  
 2  
 x  
 -  
Board for ISDN basic rate access.  
Configuration of ISDN trunks, tie trunks, and stations (no feeding) on the same board is possible.  
STLS4  
 4  
 8  
 1  
 x  
 x  
1The system may be configured with two HG 1500 boards if PDM1 is not used.

Options  

 Table 2-17   Optional Boards for HiPath 3350
 Board Name  
 Capacity  
 Country  
 Type/Description  
 ROW  
 USA  
ALUM4  
Trunk failure transfers  
 4  
 x  
 x  
Trunk failure transfer; this board transfers loop start trunks directly to internal analog stations in the event of a power failure (note the signaling method used).  
ANI4  
Analog trunks  
 4  
 -  
 x  
This board allows calling line identification (caller ID) in conjunction with TMGL4.  
GEE12  
Number of call charge receivers  
 4  
 x  
 -  
This optional board records the country-specific call charge pulses (12 kHz) from the trunk.  
GEE16  
Number of call charge receivers  
 4  
 x  
 -  
This optional board records the country-specific call charge pulses (16 kHz) from the trunk.  
GEE50  
Number of call charge receivers  
 4  
 x  
 -  
This optional board records the country-specific call charge pulses (50 Hz) from the trunk.  
V24/1  
Interfaces  
 1  
 x  
 x  
Serial V.24 interface for connecting a PC, printer, or Plus Products  
STBG4  
   
 x  
 -  
Current-limiting module for LS interface (France only)  
EXM  
   
 x  
 -  
External music on hold  
EXMNA  
   
 -  
 x  
External music on hold (A-LAW)  
MPPI (Product of BEYERTONE GmbH), or  
MUSIC (Product of Sound Player GmbH)  
   
 x  
 -  
Music on hold (MOH)  
UAM  
   
 x  
 -  
Announcement before answering/music on hold/relay/sensor  
STRB  
Sensors  
 4  
 x  
 x  
Control relay module; provides 4 relays and 4 sensors for controlling external devices or detecting external control events.  
Relay  
 4  
   
   

2.1.7.4  
Peripheral components, HiPath 3500 

Subscriber Line Modules  

 Table 2-18   Subscriber Line Modules for HiPath 3500
 Board Name  
 Capacity  
 Country  
 Type/Description  
Ports per board  
B channels per board  
Max. number of
boards per system  
ROW  
USA  
8SLAR  
 8  
   
 #1  
 x  
 x  
Board for connecting analog stations (a/b, T/R)  
HXGR3  
 2  
 8  
 3  
 x  
 x  
HG 1500 board for the direct connection of IP workpoint clients.  
IVMS8NR  
 8  
 8  
 1  
 x  
 x  
Board for the integrated voicemail functions in HiPath Xpressions Compact (8 ports).  
IVMS8R  
 8  
 8  
 1  
 x  
 x  
Board for the integrated voicemail functions in HiPath Xpressions Compact (8 ports).  
IVMP4R  
 4  
 4  
 1  
 x  
 x  
Board for the integrated voicemail functions in HiPath Xpressions Compact (4 ports).  
SLAD8R  
 8  
   
 #1  
 x  
 x  
Board for connecting analog stations (a/b, T/R)  
SLU8R  
 8  
 16  
 #1  
 x  
 x  
Board for connecting telephones with UP0/E interface (TDM)  
STLS4R  
 4  
 8  
 #1  
 x  
 x  
Board for ISDN basic rate access.
Configuration of ISDN trunks, tie trunks, and stations (no feeding) on the same board is possible.  
1The maximum number is calculated on the basis of the system-specific capacity limits, See Section 2.3 "System-Specific Capacity Limits for HiPath 3000, HiPath 5000".

Trunk Boards  

 Table 2-19   Trunk Boards for HiPath 3500
 Board Name  
 Capacity  
 Country  
 Type/Description  
Ports per board  
B channels per board  
Max. number of
boards per system  
ROW  
USA  
TCASR-2  
 2  
 601  
 1  
 x2  
 -  
Board for supporting country-specific
CAS (Channel Associated Signaling) protocols  
STLS4R  
 4  
 8  
 #3  
 x  
 x  
Board for ISDN basic access. Permits configuration of ISDN trunks, tie trunks, and subscribers (no feeding) on the same board.  
TLA4R  
 4  
   
 #3  
 x  
 -  
Trunk board for analog lines including ALUM and call metering receiving equipment board  
TLANI4R  
 4  
   
 #3  
 x  
 x  
Trunk board for analog lines including ALUM  
TMGL4R  
 4  
   
 #3  
 -  
 x  
Trunk board for analog lines  
TS2R  
 30  
 30  
 1  
 x  
 -  
In HiPath 3000/5000 V5.0 and later, the B channels in the TS2R board are subject to license. Consequently, the TS2R board S30810-K2913-Z300 has been assigned a new hardware identification code. The new code prevents the board from being used in earlier versions. Functionality and layout of the board have not been changed.  
TST1  
 1  
 24  
 1  
 -  
 x  
PRI board  
1TCASR-2 provides two E1 CAS interfaces which, combined, can support up to 60 B channels.
As HiPath 3500 supports a maximum of 30 B channels, a total of up to 30 B channels may be used.
2For selected countries only
3The maximum number is calculated on the basis of the system-specific capacity limits, See Section 2.3 "System-Specific Capacity Limits for HiPath 3000, HiPath 5000".

Boards for Tie Trunk Traffic  

 Table 2-20   Tie Trunk Traffic Boards for HiPath 3500
 Board Name  
 Capacity  
 Country  
 Type/Description  
Ports per board  
B channels per board  
Max. number of
boards per system  
ROW  
USA  
HXGR3  
 2  
 8  
 3  
 x  
 x  
HG 1500 board for connecting the HiPath 3500 system directly to a local data network (Ethernet).  
TS2R  
 30  
 30  
 1  
 x  
 -  
In HiPath 3000/5000 V5.0 and later, the B channels in the TS2R board are subject to license. Consequently, the TS2R board S30810-K2913-Z300 has been assigned a new hardware identification code. The new code prevents the board from being used in earlier versions. Functionality and layout of the board have not been changed.  

Options  

 Table 2-21   Optional Boards for HiPath 3500
 Board Name  
 Capacity  
 Country  
 Type/Description  
ROW  
USA  
ANI4R  
Analog
trunks  
 4  
 -  
 x  
This board allows calling line identification (caller ID) in conjunction with TMGL4R.  
EXMR  
   
 x  
 x  
External music on hold  
MPPI (Product of BEYERTONE GmbH), or MUSIC (Product of Sound Player GmbH)  
   
 x  
 -  
Music on hold (MOH)  
UAMR  
   
 x  
 -  
Announcement before answering/music on hold/relay/sensor  
STRBR  
Sensors  
 4  
 x  
 x  
Control relay module; provides 4 relays and 4 sensors for controlling external devices or detecting external control events.  
Relay  
 4  
   
   

2.1.7.5  
Peripheral components, HiPath 3300 

Subscriber Line Modules  

 Table 2-22   Subscriber Line Modules for HiPath 3300
 Board Name  
 Capacity  
 Country  
 Type/Description  
Ports per board  
B channels per board  
Max. number of
boards per system  
ROW  
USA  
8SLAR  
 8  
   
 2  
 x  
 x  
Board for connecting analog stations (a/b, T/R)  
HXGR3  
 2  
 8  
 1 (21)  
 x  
 x  
HG 1500 board for the direct connection of IP workpoint clients.  
IVMP4R  
 4  
 4  
 1  
 x  
 x  
These boards are for the integrated voicemail functions in HiPath Xpressions Compact (4 ports).  
IVMP8R  
 8  
 8  
 1  
 x  
 x  
These boards are for the integrated voicemail functions in HiPath Xpressions Compact (8 ports).  
IVMS8NR  
 8  
 8  
 1  
 x  
 x  
These boards are for the integrated voicemail functions in HiPath Xpressions Compact (8 ports).  
IVMS8R  
 8  
 8  
 1  
 x  
 x  
These boards are for the integrated voicemail functions of HiPath Xpressions Compact.  
SLAD8R  
 8  
   
 2  
 x  
 x  
Board for connecting analog stations (a/b, T/R)  
SLU8R  
 8  
 16  
 2  
 x  
 x  
Board for connecting telephones with UP0/E interface (TDM)  
STLS4R  
 4  
 8  
 2  
 x  
 x  
Board for ISDN basic rate access.
Configuration of ISDN trunks, tie trunks, and stations (no feeding) on the same board is possible.  
1The system may be configured with two HG 1500 boards if PDM1 is not used.

Trunk Boards  

 Table 2-23   Trunk Boards for HiPath 3300
 Board Name  
 Capacity  
 Country  
 Type/Description  
Ports per board  
B channels per board  
Max. number of
boards per system  
ROW  
USA  
TLA4R  
 4  
   
 2  
 x  
 -  
Trunk board for analog lines including ALUM and call metering receiving equipment board  
TLANI4R  
 4  
   
 2  
 x  
 -  
Trunk board for analog lines including ALUM  
TMGL4R  
 4  
   
 2  
 -  
 x  
Trunk board for analog lines  
STLS4R  
 4  
 8  
 2  
 x  
 x  
Board for ISDN basic rate access.  
Configuration of ISDN trunks, tie trunks, and stations (no feeding) on the same board is possible.  

Boards for Tie Trunk Traffic  

 Table 2-24   Tie Trunk Traffic Boards for HiPath 3300
 Board Name  
 Capacity  
 Country  
 Type/Description  
Ports per board  
B channels per board  
Max. number of
boards per system  
ROW  
USA  
HXGR3  
 2  
 8  
 1 (21)  
 x  
 x  
HG 1500 board for connecting the HiPath 3300 system directly to a local data network (Ethernet).  
1The system may be configured with two HG 1500 boards if PDM1 is not used.

Options  

 Table 2-25   Optional Boards for HiPath 3300
 Board Name  
 Capacity  
 Country  
 Type/Description  
 ROW  
 USA  
ANI4R  
Analog
trunks  
 4  
 -  
 x  
This board allows calling line identification (caller ID) in conjunction with TMGL4R.  
EXMR  
   
 x  
 x  
External music on hold  
MPPI (Product of BEYERTONE GmbH), or  
MUSIC (Product of Sound Player GmbH)  
   
 x  
 -  
Music on hold (MOH)  
UAMR  
   
 x  
 -  
Announcement before answering/music on hold/relay/sensor  
STRBR  
Sensors  
 4  
 x  
 x  
Control relay module; provides 4 relays and 4 sensors for controlling external devices or detecting external control events.  
Relay  
 4  
   
   

HiPath 3000/5000 V9, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2014-02-27