2.5.3 |
Thumb Rule for HG 1500 V3.0 |
2.5.3.1 |
Procedural Principles |
| The thumb rule presented below for calculating the dynamic load for the HG 1500 board is based on the principle of considering every functionality (HFA phone, IP trunking, gateway channels, VPN tunnel, etc.) in terms of its CPU load. |
2.5.3.2 |
Maximum Permissible Values for HG 1500 V3.0 |
| For version V3.0, the following maximum permissible point totals are used as a basis for the thumb rule: |
|
|
|
|
|
|
|
|
|
|
2.5.3.3 |
Current Thumb Rule Values |
| The following table lists the interfaces taken into account in the thumb rule. |
PDM Modules |
| |
Signaling |
Gateway Channels (DSP - LAN) |
The following table indicates the HG 1500 gateway channel load (DSP LAN) required for connections between TDM and IP, e.g., for calls between CO and IP phones. The size of the HG 1500 load depends on various features (for example, "Enhanced B Channels", VPN functionality) and on the voice codec used (G.711, G.729, G.723).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Voice Channels (LAN1 - LAN2) |
The following table indicates the HG 1500 voice channel load (LAN1 LAN2) when voice packets are routed via the HG 1500, e.g., for calls between IP phones in two different systems networked via a VPN tunnel. The size of the HG 1500 load depends on the encryption algorithm (AES or 3DES) and on the voice codec used (G.711, G.729, G.723).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Data (LAN) |
The following table indicates the HG 1500 data routing load (LAN1 LAN2), e.g., for a DSL connection to the Internet or a data connection for two locations via VPN. The size of the HG 1500 load depends on the encryption algorithm used (AES or 3DES), and on the packet rate and average packet size.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PPP Channels |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| HiPath 3000/5000 V9, Service Documentation, Issue 10 | up ![]() |
|
![]() |
||
| Disclaimer & Copyright | ID: P31003H3590S100017620 | 2014-02-27 |