6.4  

Installation Requirements 
 
To use HiPath 5000, the following minimum requirements must be met:
 •   Hardware and software
   
 Table 6-2   HW and SW Minimum Requirements for HiPath 5000
 Component  
 New system  
 Upgrade an existing system to V9  
Processor  
3 GHz CPU  
Pentium III 1 GHz  
RAM space  
See Table 6-3  
See Table 6-3  
Hard disk  
80 GB  
18 GB  
Operating system  
MS Windows Server 2000 or MS Windows Server 2003  
MS Windows Server 2000  
Interfaces  
2 x serial  
2 x serial  
Slots  
free PCI slots (for S0/S2M boards for HPCO and HiPath Xpressions)  
free PCI slots (for S0/S2M boards for HPCO and HiPath Xpressions)  
Drives  
DVD drive  
DVD drive  
Network card  
10/100/1000 Mbps Ethernet network card  
10/100 Mbps Ethernet network card  
Monitor  
17-inch color monitor  
17-inch color monitor  
 •   Licenses
    Information on features, interfaces, and products which are subject to mandatory licensing can be found in Chapter 8 "Licensing".
 •   RAM requirements of the HiPath 5000 server
    Table 6-3 can be used to determine the required RAM expansion (RAM space) of the HiPath 5000 server depending on the number of nodes in the HiPath 3000/5000 network and the applications installed on the server.
   
 Table 6-3   RAM Space of the HiPath 5000 Server
   
 Minimum RAM  
 Up to
2 nodes  
 Up to
8 nodes  
 Up to
16 nodes  
 Up to
32 nodes  
 Up to
64 nodes1  
HiPath 5000 V9
+ HiPath FM V3.0
+ Teledata Office V3.0
+ HiPath Software Manager  
 512 MB  
 1 GB  
 1 GB  
 1.5 GB  
 2 GB  
OpenScape Office Contact Center with OpenScape Xpressions2  
 + 400 MB  
 + 400 MB  
 + 600 MB  
 not supported  
 not supported  
DLS  
 + 250 MB  
 + 250 MB  
 + 250 MB  
 + 250 MB  
 + 250 MB  
1Networks are currently released with up to 32 nodes. Larger configurations can be released on a project-specific basis.
2In this special configuration, OpenScape Xpressions supports up to 248 Unified Messaging users or 400 voice mail users.