5.2.5  
Not for U.S.: Entering the System Number 
 

Introduction  
Corresponding to the configuration, the system station number must be entered (without the DID number or attendant code) on the system telephone that is assigned 100 as its internal station number for HiPath 3550 and HiPath 3500 and 11 in the case of HiPath 3350 and HiPath 3300.
The system station number is determined by the network or service provider.
Depending on the configuration type, system station numbers should not be entered for point-to-multipoint operation or for tie trunks to HiPath 4000, for example.

Example  
 •   Port number: 98008
 •   National number: 2302 (prefix without 0)
 •   International number: 49 (country code)
 •   Station number type: international

Input procedure  

 Table 5-8   Entering the System Number
 Step  
 Input  
 Description  
 1.  
 *95  
System administration code  
 2.  
 Service  
User name (identification)  
 3.  
 XXXXX  
Enter password  
 4.  
   
   
Watch the display.  
Scroll until "ISDN parameters" and "System station number" appear.
Confirm your selection.  
OR:  
Expert mode: Enter the code 20 2 1 to 4.  
 5.  
   
Follow the user prompting on the display.  

HiPath 3000/5000 V9, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2014-02-27