5.2.3  
Carrying Out a System Reload 
 
After supplying the system with power, you must carry out a system reload. This can be performed during the initial system boot.

Procedure  
Press and hold down the reset switch for at least 5 seconds (RUN LED goes out). If you do not hold down the reset switch for a full 5 seconds, the system may perform a reset rather than a reload or may not reload properly.

HiPath 3000/5000 V9, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2014-02-27