 |
|
|
|
12.4.6 |
Trace Options for HiPath 3000 |
|
12.4.6.1 |
Tracing ISDN activities |
| This feature allows the user to trace ISDN telephones (subscriber ports) and ISDN trunks (trunk ports) in real time. ISDN activities are routed to HiPath 3000/5000 Manager E and saved in a trace file. Only the ISDN sequences are displayed on the monitor, not the content of the ISDN messages. |
| The call occurs via HiPath 3000/5000 Manager E: Maintenance, "Call Monitoring" tab. The Start button starts Call Monitoring, whereupon the data of all available ports in the system is read out. |
| If the trace session is over, you can start the ISDN Message Decoder (ISDN Tracer) and use it to convert the trace file into a readable format (English only). You can also read out the trace data using remote service. |
| The ISDN Message Decoder is a 32-bit application which converts ISDN layer-3 messages and information elements into a readable format. Since you cannot find out from the trace file whether it deals with an information element from a Euro ISDN or a QSig configuration, you have to select the protocol. You may select the following settings from the main menu: |
| • | Raw (default setting) |
| • | Euro ISDN |
| • | QSig V1 |
| • | CorNet NQ |
| With the "Raw" setting, the Hex values are only decoded, not interpreted. With the other two settings, the Hex values are decoded and interpreted for each feature (CC, AOC, etc.). |
12.4.6.2 |
Tracing call-specific activities |
| You can trace all activities that were initiated by a call for telephones, trunks, etc. These include consultation calls, conference calls, and hunt groups, for example. |
| HiPath 3000/5000 V9, Service Documentation, Issue 10 | up  |
|
|
||
| Disclaimer & Copyright | ID: P31003H3590S100017620 | 2014-02-27 |