12.2.6  
Configuration of SSDP and devices 
 

12.2.6.1  
Checking if the SSDP server is reached 
The Plug PC must reach the SSDP server via the customer's LAN and router. In order to make this happen, the Plug PC's service plugin must be activated.

Procedure  
 1.   Click Administration > SSDP. The "Smart Services Delivery Platform" window opens, the Service Plugin tab is displayed. In the "State" section, a message is displayed which informs that the Smart Services Delivery Platform (SSDP) is deactivated.
 2.   Establish the connection to the SSDP server:
   a)   In the "Partner ID" section, enter the Partner ID.
   b)   In the "Actions" section, click Activate. The service plugin is activated. If the connection to the SSDP server is established, the "State" and "Connected" status lights are green.
 3.   Enter the proxy settings:
   a)   Click the Proxy Parameters tab. The following check boxes can be activated:
     •  Enable Proxy Auto-Configuration
     •  Enable HTTP Proxy
     •  Enable SOCKS Proxy
   b)   Click Save. The changes are saved.
 4.   Configure the name of the device:
   a)   Click the Device Identification tab. The "Device model", "Smart Services device ID", and "Device name" lines are displayed.
   b)   Enter the name of the device into the "Device name" field, e. g., like it is displayed in the "Smart Services device ID" line.
   c)   Click Save. The changes are saved.

12.2.6.2  
Configuring the Plug PC for HiPath 3000, HG 1500, and HiPath Xpressions Compact 
The next step is to configure your HiPath 3000, HG1500, and Xpressions Compact within the Plug PC.

Procedure  
 1.   Click Administration > Managed devices. The "Managed devices" window opens.
 2.   Click New. The "New managed device" window opens. The following parameters must be entered:
   •  Host / IP address
   •  Model. In this options field, one of the following devices must be selected: HiPath 3000, HG1500, or HiPath Xpressions Compact.
   •  Serial / MAC address
   •  Name
   •  Active. This check box must be activated.
 3.   Click Save. The changes are saved. In the "Managed devices" window, the created device is displayed in the "Overview of the managed devices" table. In this table, the entered parameters are displayed. In the menu on the left hand side, the IP address of the device is displayed under the "Managed devices" menu item.

12.2.6.3  
Monitoring success 
Once this is all done you should be able to find your configured devices on the SSDP server. Please note that the SSDP server connection will be reset when you add managed devices via SSDP remote connection. You can now access the Plug PC, the HG 1500, and the HiPath Xpressions Compact via Smart Services Assistant, and your HiPath 3000 via Manager E. Please note that if you access SSDP via SIRA, Manager E on the SIRA server will be used. If you access SSDP directly, you need the latest Manager E installed on your remote PC because in this case your local Manager E will be used.

HiPath 3000/5000 V9, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2014-02-27