D.2  
HiPath 3550 Board Power Requirement 
 

 Table D-3   Nominal Output of the HiPath 3550 Power Supply Units
 Power Supply Unit  
 Part Number  
 Max. Nominal Output in W  
 5 V  
 -48 V  
UPSC-D  
S30122-K5660-A300  
S30122-K5660-M300  
 40.0  
 53.0  
Powerbox PB3000 with LUNA2  
S30177-U773-X with S30122-K7686-M1  
 -  
 110  
You must check whether the total power requirement of the boards used and the workpoint clients connected exceeds the maximum possible output of the UPSC-D with or without Powerbox PB3000. Section D.7 "Checking Whether the Output of a Power Supply Unit is Sufficient" contains a sample calculation.  

 Table D-4   HiPath 3550 Board Power Requirement
 Board or Component  
 Part Number  
 Net Power Requirement in W  
 5 V  
 -48 V  
BS3/1  
S30807-H5482-X  
 -  
 2.0  
BS3/3  
S30807-H5485-X  
 -  
 3.0  
CBCC (including subboards)  
S30810-Q2935-A301  
 7.0  
 0.5  
GEE12  
S30817-Q951-Axxx  
 0.5  
 -  
GEE16  
S30817-Q951-Axxx  
 0.5  
 -  
GEE50  
S30817-Q951-Axxx  
 0.5  
 -  
HXGS3 (including ventilator kit)  
S30810-Q2943-X, S30810-Q2943-X1  
 10.0  
 2.8  
HXGS3 (excluding ventilator kit)  
S30810-Q2943-X, S30810-Q2943-X1  
 10.0  
 -  
IVMS8  
S30122-Q7379-X  
 2.6  
 0.3  
P DM1  
S30807-Q5692-X100  
 -  
 5.0  
SLA8N  
S30810-Q2929-X200  
 0.2  
 0.5  
SLA16N  
S30810-Q2929-X100  
 3.0  
 3.0  
SLA24N  
S30810-Q2929-X  
 4.5  
 4.5  
SLAD4  
S30810-H2956-X100  
 2.0  
 1.0  
SLAD8  
S30810-H2956-X200  
 2.0  
 1.0  
SLAD161  
S30810-Q2957-X  
 2.5  
 1.52  
SLC16N  
S30810-Q2193-X100  
 5.0  
 -  
SLMO24  
S30810-Q2901-X  
 1.5  
 -  
SLU8  
S30817-Q922-A301  
 0.8  
 -  
STLS2  
S30817-Q924-B313  
 0.6  
 -  
STLS4  
S30817-Q924-A313  
 1.0  
 -  
STRB  
S30817-Q932-A  
 0.5  
 -  
T CAS-2  
S30810-Q2945-X  
 4.5  
 -  
TLA2  
S30817-Q923-Bxxx  
 0.1  
 -  
TLA4  
S30817-Q923-Axxx  
 0.2  
 -  
TLA8  
S30817-Q926-Axxx  
 0.4  
 -  
TMAMF  
S30810-Q2587-A400  
 1.83  
 16.93  
TMCAS  
S30810-Q2938-X  
 Information not available  
TMGL4  
S30810-Q2918-X  
 4.73  
 0.13  
TMQ4  
S30810-Q2917-X  
 3.8  
 -  
TST1  
S30810-Q2919-X  
 0.8  
 -  
TS2N  
S30810-Q2913-X300  
 0.9  
 -  
V24/1  
S30807-Q6916-X100  
 0.3  
 -  
4SLA  
S30810-Q2923-X200  
 0.7  
 0.7  
8SLA  
S30810-Q2923-X100  
 1.3  
 1.3  
16SLA  
S30810-Q2923-X  
 2.5  
 2.5  
1Detailed configuration rules are provided in section 3.3.12 SLAD16.
2For each active (off hook) station, the net resource requirement increases by approximately 1.6W (dependent on the telephone's line length and DC resistance).
3Identified at a traffic flow of 0.8 Erlang

HiPath 3000/5000 V9, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2014-02-27