D  
Identifying System Power Requirements 
 
The following values are for orientation only, and can vary depending on the traffic flow.  
This supplement specifies the power requirement of the boards and components of the HiPath 3000 systems. In addition, information is provided on the power requirement of the different workpoint clients, key modules and adapters.
With this information,
 •   the individual system power requirement can be identified.
 •   every system configuration can be checked to see whether the nominal output of the power supply unit is sufficient or whether an additional power supply may be needed.

 Topic  
HiPath 3800 Board Power Requirement, page D-2  
HiPath 3550 Board Power Requirement, page D-4  
HiPath 3350 Board Power Requirement, page D-6  
HiPath 3500 Board Power Requirement, page D-8  
HiPath 3300 Board Power Requirement, page D-10  
Workpoint Client, Add-On Device, and Adapter Power Requirements, page D-11  
Checking Whether the Output of a Power Supply Unit is Sufficient, page D-14  
Identifying the Primary System Power Requirement, page D-17  
To ensure that a system's dynamic capacity limit is not exceeded, the configuration can be tested using the project planning tool:
https://enterprise-businessarea.unify.com/productinfo/document/9fTFkWdA76U_/HiPath%203000%20V8%20Planungsanleitung%20Performance%20Calculation%20Tool.xls  

HiPath 3000/5000 V9, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2014-02-27