A  
System Programming Codes (Expert Mode Codes) 
 

A.1  
Introduction 
 
The workpoints with the two lowest internal station numbers (for example, 11 and 12 or 100 and 101) can be used to administer HiPath 3000 systems.
Programming is conducted in expert mode. This allows you to program features and settings by inputting defined digit strings.
You must acknowledge error messages. When the system reports an error as a result of entering a previously used code, a code appears in the second line of the display. You can use this code to go directly to the desired menu segment.

HiPath 3000/5000 V9, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2014-02-27