4.2  
Installing HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300 
 

4.2.1  
Installation Prerequisites 
 
Warning  
Only authorized service personnel should install and start up the system.  

Tools and resources needed  
The following are needed for installing the HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300 systems:
 •   Tools:
   -   Diagonal cutting pliers, telephone pliers, wire stripper, flat-nosed pliers
   -   Slotted screwdrivers, from 2 to 8 mm (1/4 to 5/16 in.)
   -   Phillips or cross-point screwdrivers, sizes 1 and 2
   -   TORX screwdriver
   -   Electric drill, hammer
   -   Level, tape measure
   -   For U.S. only: Punch-down tool suitable for the block used (such as block 66)
 •   Resources:
   -   Assistant T or HiPath 3000/5000 Manager E
   -   Digital multimeter for testing ground connections and partial voltages
   -   Telephone test set for analog interfaces
   -   Not for U.S.: ISDN tester (such as K3000 or Aurora)
   -   For U.S. only: AuroraDuet, AuroraExpert, AuroraRemote or similar, ISDN protocol analyzer

HiPath 3000/5000 V9, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2014-02-27