1.6  
Standards and Guidelines for Installation 
 

1.6.1  
Connection to the Power Circuit 
 
HiPath communication systems are approved for connection to TN-S power supply systems. They can also be connected to a TN-C-S power supply system in which the PEN conductor is divided into a ground wire and a neutral wire. TN-S and TN-C-S systems are defined in the IEC 364-3 standard.
If work needs to be done on the low-voltage network, this must be carried out by a qualified electrician. When installing and connecting the HiPath communication systems, the IEC 60364 and IEC 60364-4-41 norms or corresponding legal norms or national requirements must be observed, e.g., in the USA/Canada.

HiPath 3000/5000 V9, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2014-02-27