13.7.4  
Special Features of Windows Networks 
 

13.7.4.1  
Routing and Name Resolution 
For routing, e.g.: when routing from HG 1500 to HG 1500 and for peer-to-peer connections (Windows for Workgroup Network for IP routing), you must create an LMHOSTS/HOSTS file on the client PCs. This is stored in the Windows directory under Windows 95, and in the directory WINNT\SYSTEM32\DRIVERS\ETC under Windows NT or 2000. The file LMHOSTS.SAM in the directory can be expanded but must not have an extension (LMHOSTS).
Sample entry:
  
192.168.10.10 HG1500
  
192.168.10.20 PC1
Do not forget to press Return after the last entry.
Once the LMHOSTS/HOSTS file has been created, a ping command with the name (for example, Ping HG 1500) should be transmitted to the partner. Since browsing is not transferred in the case of routers (broadcast messages), the other PC can only be found by right-clicking the "Network Neighborhood" and "Find Computer" icons. Once the computer has been found, the network resources can be accessed. The other PC cannot be accessed by opening the network neighborhood.
Names should contain no more than eight characters since some operating systems run into problems if there are more than eight characters in the name.  
Modifications in LMHOSTS/HOSTS are only effective after the computer has been rebooted. Under Windows 95 and 98 you can also use the command NBTSTAT
-R.  

HiPath 3000/5000 V9, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2014-02-27