3.4.9  
HOPE (for U.S. only) 
 

Introduction  
The HOPE (Hicom Office PhoneMail Entry) board provides Hicom Office PhoneMail Entry functions.
The HOPE board does not identify itself to the system and is therefore not visible in the HiPath 3000/5000 Manager E card map. When expanding a system (such as HiPath 3350 or HiPath 3550), ensure that a free slot is available.  

Interfaces  
 Figure 3-141   HOPE (for U.S. only) (S30122-Q7078-X; S30122-Q7079-X)
 

Board components  
The following list describes the purpose of the components on the HOPE board:
 •   The LED status indicator signals the state of the Hicom Office PhoneMail system
 •   The software load/diagnostic button is for software loads (for example, loading a specific language).
 •   The digital station connector connects the HOPE board to the corresponding digital ports, using a modular cable
 •   The on/off switch turns the Office PhoneMail system on and off
 •   The PCMCIA slot is for Office PhoneMail software cards (for example, voice cards).
 •   The card ejector ejects the software cards from the PMCIA slot

Installation, servicing, and connectivity  
For information on installing, connecting, and servicing the HOPE board, refer to the Hicom Office PhoneMail Entry Installation and System Administration Guide.

HiPath 3000/5000 V9, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2014-02-27